EMC Testing – A Closer Look

What is EMC Testing?

Electromagnetic compatibility testing, commonly known as EMC Testing, is compulsory for manufacturers of certain products in the UK. This testing is necessary to demonstrate that their products are compliant with EMC standards, and is essential to meet the mandated requirements for distribution to the market. Most of today’s electrical products and electronic equipment are subjected to electromagnetic compatibility testing.

The Importance of EMC Testing

EMC testing is mandatory for almost all products which have an electronic or electrical circuitry whether wired or wireless powered. This is to ensure that products can function satisfactorily in the environment which they are going to be used. Furthermore, so they do not cause interference to other products.

Product testing is found to be highly beneficial for manufacturers, especially during the development cycle. Catching issues early on in this cycle can highlight failures earlier, and help to avoid costly product recalls and associated delays. A test failure identified at the end of the product development process can prove extremely costly, especially in redesign of the product.

What Types of Equipment & Markets Require EMC Testing?

Compliance with the EMC testing is mandatory in almost all markets including the U.S., Europe and Australia, among many others. This test is required for manufacturers in various industries including, but not limited to:

  • Medical devices;
  • Consumer products;
  • Military equipment;
  • Industrial machinery;
  • Automotive;
  • Aerospace; and
  • Railway

What Kind of Equipment Needs to be EMC Tested?

In general, if your product contains any active electronic components, (such as diodes, transistors, microcontrollers, etc), then your product is required to be tested under the EMC Regulations. There are a few exemptions such as the following:

  • Custom-built evaluation equipment – This applies to kit that has been built for a single customer by request, for use in research or development. If the kit is later provided on a regular basis, or goes on to be used for purposes other than research or development, then it can no longer be considered exempt from the regulations.
  • Evaluation kits – Electronic evaluation kits as supplied from many electronics manufacturers are exempt from the regulations as they are intended for use by professionals for research & development purposes.

An exemption cannot be claimed for any equipment that is to be used on a regular basis, such as laboratory equipment, equipment used to perform tests for the purposes of research or for other applications such as demonstrating the conformity or quality of a product.

Inherently Benign Equipment

There is another exemption from the regulations for equipment that is electromagnetically benign as a result of the design & construction.

Equipment can be considered benign for purposes of the regulations if the inherent characteristics are such:

  • The device is incapable of generating or contributing to electromagnetic emissions which exceed a level allowing radio and telecommunications equipment and other equipment to operate as intended; and
  • The device will operate without unacceptable degradation in the presence of the electromagnetic disturbances normally encountered in its intended environment.

The product has to meet both of these conditions to be considered benign. Examples of equipment that would be covered under this exemption are:

  • Cables, or cable assemblies, separate from any product. (Manufacturers should consider the potential significant effect on EMC performance of equipment when cables are installed).
  • Equipment containing only resistive loads without any form of automated switching devices; such as heaters, kettles, fans.
  • Batteries without any active electronic controls.
  • Corded passive headphones, unamplified loudspeakers, and guitar inductive pickup coils without electronic controls.
  • AC induction motors without electronic speed controls or Variable Frequency Drives.
  • Pocket lamps without active electronic circuits (including LED lamps).
  • Quartz watches without any additional functions other than timekeeping.
  • Mechanical Switches.
  • Passive Antennas.
  • Electromechanical relays without active electronic parts.

Preparation for EMC Testing

It’s imperative for manufacturers to prepare the EMC testing requirements prior to entering the EMC test chamber in order to achieve the best results.

To be able to avoid delays in the marketing of your products, you need to properly prepare for what is needed prior to the final EMC testing. You must also allocate enough time to book an available booking at the testing laboratory, sometimes the lead time can be weeks. You must also allow a contingency plan if the product initially does not comply. Allow time for any re-work or modifications are required i.e. compliance engineering the product to meet the standards.

Prepare a Test Plan

Before the testing is done, it is necessary to be able to define the process beforehand. Analysing the requirements and knowing the types of test that your product needs to undergo is imperative. You need to know whether your product is subjected to conducted and radiated emissions only. Or if you will also need the EMC immunity testing as well. You will also need to know which ports will be tested, which levels or limits will be used and what the pass and fail criteria are. That is why writing a test plan is essential.

What Information Should be On My Test Plan?

If you have already undergone Electromagnetic Compatibility Testing before, then you will be able to create a test plan yourself. However, if it is your first time to have an EMC test conducted, you might need a little bit of assistance. A good test plan must have the following:

  • Product name, model number and identification details;
  • Product description of device to be tested including its I/O configurations and peripherals;
  • Required standards and applicable tests that is listed in the standards;
  • Quantity of samples requiring testing;
  • Product power supply requirements, i.e. 115/230VAC, 50/60Hz, 12VDC, PoE etc;
  • Dimensions of the product/system and also the weight of the product/system;
  • Type of equipment is it tabletop or floor standing;
  • Transmitter information if an wireless radio module is incorporated or used;
  • The lowest and highest internal frequencies used within the product;
  • Ports table including cable types, quantities, terminations and cable lengths;
  • Operating modes of the product;
  • Operating mode of the product and configuration for emissions testing (worst case);
  • Product emissions limits i.e. Class A, Class B etc (if applicable);
  • Operating mode of the product and configuration for immunity testing (worst case);
  • Declaring the intended environment, such as Basic, Industrial or Controlled EM etc;
  • EUT cycle time to complete all operations and allow observation of any failures;
  • Customer specified performance criteria and ways to recognise, monitor and report failures;
  • Test fixtures, special software and supporting equipment to correctly exercise the product;
  • Definition of failure;
  • Estimated set-up time of the physical configuration and support equipment/software;
  • Declaring any health and safety related issues such as hazardous materials etc;
  • Special needs such as power, software and cooling among others;

Getting Testing Scheduled

Once you have the test plan written, you can now get the pricing and scheduling from an accredited 3rd party EMC test lab such as ourselves. Prepare the software and hardware for testing. More often than not, you will need the following:

  • Equipment under test (EUT) and spares;
  • Test fixture (if required);
  • Auxiliary support equipment;
  • Connectors and cables;
  • Toolkit;
  • Equipment’s design documentation

During the test, it is often handy to have an engineer who knows the equipment present to assist the test engineers in operation & monitoring of the product for any potential failures as they occur.

Preparation Prior to Testing

Additionally, possible delays can be avoided if you are well prepared for the testing. Hence, when preparing your software and hardware for testing, you need to take note of the following:

  • The product that has to be tested must have its peripheral equipment included which constitute the entire system;
  • Any optional or auxiliary equipment that may be required during the test. If your product has a USB port, include a USB peripheral that can be used for that port. If you don’t ship a product with USB peripheral, then you provide a typical unit. Ensure that unit is pre-compliant to avoid failure during the test;
  • If functional auxiliary equipment for a particular port is not possible, dummy loads that exercise a port to its fullest extent will often do;
  • A monitoring method. This is crucial for immunity testing since the lab needs to monitor the performance of your product. Clearly defining methods for which you would like your product to be monitored is helpful to EMC test labs;
  • Two or more alternative backup power supply units. This is helpful whenever there’s a failure in conducted emissions testing. Conducted emissions problems can often be alleviated by swapping an external power adapter with a better performing one. Having more adapters can also be useful when doing surge testing;
  • Cables that are needed when exercising your product to the fullest. They must be the right length.
  • A software/firmware test mode that is needed when exercising all communication interfaces, memory interfaces and all moving parts at the highest speed possible; and
  • Proper documentation needed by the test engineers. This is highly important because if test engineers don’t know how to set up or operate your product into the proper test mode, it could delay the test schedule.

UKCA Designated Standards

Now we’re getting well into the Transition period, another Brexit update is here!

The UK Government has issued lists of Designated Standards, covering which EN standards will be acceptable for use within the UK for testing to UKCA marking requirements, available from the link here: https://www.gov.uk/guidance/designated-standards

Handily, the provided information from the Government does list all the accompanying UK Statutory Instruments, along with any notes & expiry dates for presumption of conformity.
For the most part, the same standards will remain in use for the foreseeable future, however the Government has said that they may change these designations, or add restrictions in their usage to best ensure the standards in question are best suited to the UK’s needs, so check back for more information as it comes in.

All designated standards will have the following prefixes:

  • BS
  • EN
  • EN ISO
  • EN IEC

Where the designated Standard specified in the notice of publication is prefixed with “EN”, it has been deemed acceptable to reference these versions in technical documentation, or a version of the same Standard with a National prefix.

While the essential legal requirements in GB remain the same as the equivalent EU law, the informative Annex ZA/ZZ and any references to EU law in designated standards should be read as applying to the legislation for Great Britain in the same way, subject to any restrictions or points made in the relevant notice of publication. This will change if and when the essential legal requirements in Great Britain change. The Government have asked BSI to ensure that any new or revised designated standards map across to the essential legal requirements in Great Britain.

This one’s about to get a little dry, so bear with us! The tables here are fully searchable, for ease in finding the desired standard.

EMC

Legislation reference (A)Reference number of the designated standard (B)Title of the designated standard (C)Date of start of presumption of conformity (1)Notice of Publication reference (2)Restriction (3)Date of start of presumption of conformity with restriction (4)Notice of Publication reference of a restriction (5)Date of removal from publication (end of presumption of conformity) (6)Notice of Publication reference for removal (7)
S.I. 2016 No. 1091EN 617:2001+A1:2010Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers01/01/20210007/21-----
S.I. 2016 No. 1091EN 618:2002+A1:2010Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors01/01/20210007/21-----
S.I. 2016 No. 1091EN 619:2002+A1:2010Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads01/01/20210007/21-----
S.I. 2016 No. 1091EN 620:2002+A1:2010Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials01/01/20210007/21-----
S.I. 2016 No. 1091EN 1155:1997,
EN 1155:1997/A1:2002
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods01/01/20210007/21-----
S.I. 2016 No. 1091EN 12015:2014Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission01/01/20210007/21-----
S.I. 2016 No. 1091EN 12016:2013Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity01/01/20210007/21-----
S.I. 2016 No. 1091EN 12895:2015Industrial trucks - Electromagnetic compatibility01/01/20210007/21---18/11/20210007/21
S.I. 2016 No. 1091EN 12895:2015+A1:2019Industrial trucks - Electromagnetic compatibility01/01/20210007/21-----
S.I. 2016 No. 1091EN 13241-1:2003+A1:2011Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics01/01/20210007/21-----
S.I. 2016 No. 1091EN 13309:2010Construction machinery - Electromagnetic compatibility of machines with internal power supply01/01/20210007/21---30/06/20210007/21
S.I. 2016 No. 1091EN ISO 13766-1:2018Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions (ISO 13766-1:2018)01/01/20210007/21-----
S.I. 2016 No. 1091EN 14010:2003+A1:2009Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages01/01/20210007/21-----
S.I. 2016 No. 1091EN ISO 14982:2009Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)01/01/20210007/21-----
S.I. 2016 No. 1091EN 16361:2013+A1:2016Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation01/01/20210007/21-----
S.I. 2016 No. 1091EN 50065-1:2011Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances01/01/20210007/21-----
S.I. 2016 No. 1091EN 50065-2-1:2003,
EN 50065-2-1:2003/A1:2005,
EN 50065-2-1:2003/AC:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments01/01/20210007/21-----
S.I. 2016 No. 1091EN 50065-2-2:2003,
EN 50065-2-2:2003/A1:2005,
EN 50065-2-2:2003/A1:2005/AC:2006,
EN 50065-2-2:2003/AC:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments01/01/20210007/21-----
S.I. 2016 No. 1091EN 50065-2-3:2003,
EN 50065-2-3:2003/A1:2005,
EN 50065-2-3:2003/AC:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors01/01/20210007/21-----
S.I. 2016 No. 1091EN 50083-2:2012,
EN 50083-2:2012/A1:2015
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment01/01/20210007/21-----
S.I. 2016 No. 1091EN 50121-1:2006,
EN 50121-1:2006/AC:2008
Railway applications - Electromagnetic compatibility - Part 1: General01/01/20210007/21-----
S.I. 2016 No. 1091EN 50121-2:2006,
EN 50121-2:2006/AC:2008
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world01/01/20210007/21-----
S.I. 2016 No. 1091EN 50121-3-1:2017Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle01/01/20210007/21-----
S.I. 2016 No. 1091EN 50121-3-2:2016Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus01/01/20210007/21-----
S.I. 2016 No. 1091EN 50121-4:2016Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus01/01/20210007/21-----
S.I. 2016 No. 1091EN 50121-5:2017Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus01/01/20210007/21-----
S.I. 2016 No. 1091EN 50130-4:2011Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder, hold up, CCTV, access control and social alarm systems01/01/20210007/21-----
S.I. 2016 No. 1091EN 50148:1995Electronic taximeters01/01/20210007/21-----
S.I. 2016 No. 1091EN 50270:2015,
EN 50270:2015/AC:2016-08
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen01/01/20210007/21-----
S.I. 2016 No. 1091EN 50293:2012Road traffic signal systems - Electromagnetic compatibility01/01/20210007/21-----
S.I. 2016 No. 1091EN 50370-1:2005Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission01/01/20210007/21-----
S.I. 2016 No. 1091EN 50370-2:2003Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity01/01/20210007/21-----
S.I. 2016 No. 1091EN 50412-2-1:2005,
EN 50412-2-1:2005/AC:2009
Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 2-1: Residential, commercial and industrial environment - Immunity requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 50428:2005,
EN 50428:2005/A1:2007,
EN 50428:2005/A2:2009
Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)01/01/20210007/21-----
S.I. 2016 No. 1091EN 50470-1:2006Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)01/01/20210007/21-----
S.I. 2016 No. 1091EN 50490:2008Electrical installations for lighting and beaconing of aerodromes - Technical requirements for aeronautical ground lighting control and monitoring systems - Units for selective switching and monitoring of individual lamps01/01/20210007/21-----
S.I. 2016 No. 1091EN 50491-5-1:2010General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up01/01/20210007/21-----
S.I. 2016 No. 1091EN 50491-5-2:2010General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light industry environment01/01/20210007/21-----
S.I. 2016 No. 1091EN 50491-5-3:2010General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industry environment01/01/20210007/21-----
S.I. 2016 No. 1091EN 50498:2010Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles01/01/20210007/21-----
S.I. 2016 No. 1091EN 50512:2009Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Docking Guidance Systems (A-VDGS)01/01/20210007/21-----
S.I. 2016 No. 1091EN 50529-1:2010EMC Network Standard - Part 1: Wire-line telecommunications networks using telephone wires01/01/20210007/21-----
S.I. 2016 No. 1091EN 50529-2:2010EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables01/01/20210007/21-----
S.I. 2016 No. 1091EN 50550:2011,
EN 50550:2011/AC:2012,
EN 50550:2011/A1:2014
Power frequency overvoltage protective device for household and similar applications (POP)01/01/20210007/21-----
S.I. 2016 No. 1091EN 50557:2011Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses01/01/20210007/21---17/01/20210007/21
S.I. 2016 No. 1091EN 50561-1:2013,
EN 50561-1:2013/AC:2015
Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use01/01/20210007/21-----
S.I. 2016 No. 1091EN 55011:2009,
EN 55011:2009/A1:2010
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement01/01/20210007/21---04/05/20220007/21
S.I. 2016 No. 1091EN 55011:2016,
EN 55011:2016/A1:2017,
EN 55011:2016/A11:2020
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement01/01/20210007/21-----
S.I. 2016 No. 1091EN 55012:2007,
EN 55012:2007/A1:2009
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers01/01/20210007/21-----
S.I. 2016 No. 1091EN 55014-1:2006,
EN 55014-1:2006/A1:2009,
EN 55014-1:2006/A2:2011
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission01/01/20210007/21---04/05/20220007/21
S.I. 2016 No. 1091EN 55014-1:2017,
EN 55014-1:2017/A11:2020
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission01/01/20210007/21-----
S.I. 2016 No. 1091EN 55014-2:1997,
EN 55014-2:1997/A1:2001,
EN 55014-2:1997/A2:2008,
EN 55014-2:1997/AC:1997
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard01/01/20210007/21-----
S.I. 2016 No. 1091EN 55015:2013Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment01/01/20210007/21---04/05/20220007/21
S.I. 2016 No. 1091EN IEC 55015:2019,
EN IEC 55015:2019/A11:2020
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment01/01/20210007/21-----
S.I. 2016 No. 1091EN 55024:2010Information technology equipment - Immunity characteristics - Limits and methods of measurement01/01/20210007/21-----
S.I. 2016 No. 1091EN 55032:2012,
EN 55032:2012/AC:2013
Electromagnetic compatibility of multimedia equipment - Emission requirements01/01/20210007/21---04/05/20220007/21
S.I. 2016 No. 1091EN 55032:2015,
EN 55032:2015/A11:2020
Electromagnetic compatibility of multimedia equipment - Emission Requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 55035:2017Electromagnetic compatibility of multimedia equipment - Immunity requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 55103-1:2009,
EN 55103-1:2009/A1:2012
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emissions01/01/20210007/21-----
S.I. 2016 No. 1091EN 55103-2:2009Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity01/01/20210007/21---18/11/20210007/21
S.I. 2016 No. 1091EN 60034-1:2010,
EN 60034-1:2010/AC:2010
Rotating electrical machines - Part 1: Rating and performance01/01/20210007/21-----
S.I. 2016 No. 1091EN 60204-31:2013Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems01/01/20210007/21-----
S.I. 2016 No. 1091EN 60255-26:2013,
EN 60255-26:2013/AC:2013
Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 60669-2-1:2004,
EN 60669-2-1:2004/A1:2009,
EN 60669-2-1:2004/A12:2010,
EN 60669-2-1:2004/AC:2007
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches01/01/20210007/21-----
S.I. 2016 No. 1091EN 60730-1:2011Automatic electrical controls for household and similar use - Part 1: General requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 60730-2-5:2002,
EN 60730-2-5:2002/A11:2005,
EN 60730-2-5:2002/A1:2004,
EN 60730-2-5:2002/A2:2010
Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems01/01/20210007/21-----
S.I. 2016 No. 1091EN 60730-2-6:2008Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 60730-2-7:2010,
EN 60730-2-7:2010/AC:2011
Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches01/01/20210007/21-----
S.I. 2016 No. 1091EN 60730-2-8:2002,
EN 60730-2-8:2002/A1:2003
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 60730-2-9:2010Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls01/01/20210007/21-----
S.I. 2016 No. 1091EN 60730-2-14:1997,
EN 60730-2-14:1997/A1:2001
Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators01/01/20210007/21-----
S.I. 2016 No. 1091EN 60730-2-15:2010Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls01/01/20210007/21-----
S.I. 2016 No. 1091EN 60870-2-1:1996Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility01/01/20210007/21-----
S.I. 2016 No. 1091EN 60945:2002Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-1:2007,
EN 60947-1:2007/A1:2011,
EN 60947-1:2007/A2:2014
Low-voltage switchgear and controlgear - Part 1: General rules01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-2:2006,
EN 60947-2:2006/A1:2009,
EN 60947-2:2006/A2:2013
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-3:2009,
EN 60947-3:2009/A1:2012
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-4-1:2010,
EN 60947-4-1:2010/A1:2012
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters01/01/20210007/21-----
S.I. 2016 No. 1091EN IEC 60947-4-1:2019Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-4-2:2012Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-4-3:2014Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-5-1:2004,
EN 60947-5-1:2004/A1:2009,
EN 60947-5-1:2004/AC:2004,
EN 60947-5-1:2004/AC:2005
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-5-2:2007,
EN 60947-5-2:2007/A1:2012
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-5-3:1999,
EN 60947-5-3:1999/A1:2005
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-5-6:2000Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-5-7:2003Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-5-9:2007Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-6-1:2005,
EN 60947-6-1:2005/A1:2014
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-6-2:2003,
EN 60947-6-2:2003/A1:2007
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)01/01/20210007/21-----
S.I. 2016 No. 1091EN 60947-8:2003,
EN 60947-8:2003/A1:2006,
EN 60947-8:2003/A2:2012
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines01/01/20210007/21-----
S.I. 2016 No. 1091EN IEC 60947-9-1:2019Low-voltage switchgear and controlgear - Part 9-1: Active arc-fault mitigation systems - Arc quenching devices01/01/20210007/21-----
S.I. 2016 No. 1091EN 60974-10:2014Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 61000-3-2:2014Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)01/01/20210007/21-----
S.I. 2016 No. 1091EN 61000-3-3:2013Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection01/01/20210007/21-----
S.I. 2016 No. 1091EN 61000-3-11:2000Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection01/01/20210007/21-----
S.I. 2016 No. 1091EN 61000-3-12:2011Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase01/01/20210007/21-----
S.I. 2016 No. 1091EN 61000-6-1:2007Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments01/01/20210007/21-----
S.I. 2016 No. 1091EN 61000-6-2:2005,
EN 61000-6-2:2005/AC:2005
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments01/01/20210007/21-----
S.I. 2016 No. 1091EN 61000-6-3:2007,
EN 61000-6-3:2007/A1:2011/AC:2012,
EN 61000-6-3:2007/A1:2011
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments01/01/20210007/21-----
S.I. 2016 No. 1091EN 61000-6-4:2007,
EN 61000-6-4:2007/A1:2011
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments01/01/20210007/21-----
S.I. 2016 No. 1091EN 61000-6-5:2015,
EN 61000-6-5:2015/AC:2018-01
Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment01/01/20210007/21-----
S.I. 2016 No. 1091EN 61008-1:2012,
EN 61008-1:2012/A1:2014
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules01/01/20210007/21-----
S.I. 2016 No. 1091EN 61009-1:2012Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules01/01/20210007/21-----
S.I. 2016 No. 1091EN IEC 61058-1:2018Switches for appliances - Part 1: General requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 61131-2:2007Programmable controllers - Part 2: Equipment requirements and tests01/01/20210007/21-----
S.I. 2016 No. 1091EN 61204-3:2000Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)01/01/20210007/21-----
S.I. 2016 No. 1091EN 61326-1:2013Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 61326-2-1:2013Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications01/01/20210007/21-----
S.I. 2016 No. 1091EN 61326-2-2:2013Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems01/01/20210007/21-----
S.I. 2016 No. 1091EN 61326-2-3:2013Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning01/01/20210007/21-----
S.I. 2016 No. 1091EN 61326-2-4:2013Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-901/01/20210007/21-----
S.I. 2016 No. 1091EN 61326-2-5:2013Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-101/01/20210007/21-----
S.I. 2016 No. 1091EN 61439-1:2011Low-voltage switchgear and controlgear assemblies - Part 1: General rules01/01/20210007/21Notice: EN 61439-1:2011 does not give presumption of conformity without another part of the standard.01/01/202101/01/2021--
S.I. 2016 No. 1091EN 61439-2:2011Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies01/01/20210007/21-----
S.I. 2016 No. 1091EN 61439-3:2012,
EN 61439-3:2012/AC:2019-04
Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)01/01/20210007/21-----
S.I. 2016 No. 1091EN 61439-4:2013Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)01/01/20210007/21-----
S.I. 2016 No. 1091EN 61439-5:2011Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks01/01/20210007/21-----
S.I. 2016 No. 1091EN 61439-6:2012Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)01/01/20210007/21-----
S.I. 2016 No. 1091EN 61543:1995,
EN 61543:1995/A11:2003,
EN 61543:1995/A12:2005,
EN 61543:1995/A2:2006,
EN 61543:1995/A11:2003/AC:2004,
EN 61543:1995/AC:1997
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility01/01/20210007/21-----
S.I. 2016 No. 1091EN 61547:2009Equipment for general lighting purposes - EMC immunity requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 61557-12:2008Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)01/01/20210007/21-----
S.I. 2016 No. 1091EN 61800-3:2004,
EN 61800-3:2004/A1:2012
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods01/01/20210007/21-----
S.I. 2016 No. 1091EN 61812-1:2011Time relays for industrial and residential use - Part 1: Requirements and tests01/01/20210007/21-----
S.I. 2016 No. 1091EN 62020:1998,
EN 62020:1998/A1:2005
Electrical accessories - Residual current monitors for household and similar uses (RCMs)01/01/20210007/21-----
S.I. 2016 No. 1091EN 62026-1:2007Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules01/01/20210007/21Notice: EN 62026-1:2007 does not give presumption of conformity without another part of the standard.01/01/20210007/21--
S.I. 2016 No. 1091EN 62026-2:2013Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)01/01/20210007/21---04/05/20220007/21
S.I. 2016 No. 1091EN 62026-2:2013,
EN 62026-2:2013/A1:2019
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)01/01/20210007/21-----
S.I. 2016 No. 1091EN 62026-3:2009Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet01/01/20210007/21-----
S.I. 2016 No. 1091EN 62026-7:2013Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet01/01/20210007/21-----
S.I. 2016 No. 1091EN 62040-2:2006,
EN 62040-2:2006/AC:2006
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 62052-11:2003Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment01/01/20210007/21Notice: EN 62052-11:2003 does not give presumption of conformity without a part of the EN 62053 series.01/01/20210007/21--
S.I. 2016 No. 1091EN 62052-21:2004Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment01/01/20210007/21Notice: EN 62052-21:2004 does not give presumption of conformity without a part of the EN 62054 series.01/01/20210007/21--
S.I. 2016 No. 1091EN 62053-11:2003Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)01/01/20210007/21-----
S.I. 2016 No. 1091EN 62053-21:2003Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)01/01/20210007/21-----
S.I. 2016 No. 1091EN 62053-22:2003Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)01/01/20210007/21-----
S.I. 2016 No. 1091EN 62053-23:2003Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)01/01/20210007/21-----
S.I. 2016 No. 1091EN 62054-11:2004Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers01/01/20210007/21-----
S.I. 2016 No. 1091EN 62054-21:2004Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches01/01/20210007/21-----
S.I. 2016 No. 1091EN 62135-2:2008Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 62310-2:2007Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 62423:2012Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses01/01/20210007/21-----
S.I. 2016 No. 1091EN 62586-1:2014Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)01/01/20210007/21-----
S.I. 2016 No. 1091EN 62586-2:2014Power quality measurement in power supply systems - Part 2: Functional tests and uncertainty requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 62606:2013General requirements for arc fault detection devices01/01/20210007/21-----
S.I. 2016 No. 1091EN 63024:2018Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses01/01/20210007/21-----
S.I. 2016 No. 1091EN 300 386 V1.6.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 301 489-1 V1.9.2Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements01/01/20210007/21-----
S.I. 2016 No. 1091EN 301 489-34 V1.4.1Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones01/01/20210007/21-----

LVD

Legislation reference (A)Reference number of the designated standard (B)Title of the designated standard (C)Date of start of presumption of conformity (1)Notice of Publication reference (2)Restriction (3)Date of start of presumption of conformity with restriction (4)Notice of Publication reference of a restriction (5)Date of removal from publication (end of presumption of conformity) (6)Notice of Publication reference for removal (7)
S.I. 2016 No. 1101EN ISO 11252:2013Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)01/01/20210009/21-----
S.I. 2016 No. 1101EN 13637:2015Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods01/01/20210009/21-----
S.I. 2016 No. 1101HD 308 S2:2001Identification of cores in cables and flexible cords01/01/20210009/21-----
S.I. 2016 No. 1101HD 361 S3:1999,
HD 361 S3:1999/A1:2006,
HD 361 S3:1999/AC:1999
System for cable designation01/01/20210009/21-----
S.I. 2016 No. 1101HD 368 S1:1978Direct acting recording electrical measuring instruments and their accessories01/01/20210009/21-----
S.I. 2016 No. 1101HD 549 S1:1989Conference systems - Electrical and audio requirements01/01/20210009/21-----
S.I. 2016 No. 1101HD 597 S1:1992,
HD 597 S1:1992/AC:1992
Coupling capacitors and capacitor dividers01/01/20210009/21-----
S.I. 2016 No. 1101HD 603 S1:1994,
HD 603 S1:1994/A3:2007,
HD 603 S1:1994/A1:1997,
HD 603 S1:1994/A2:2003
Distribution cables of rated voltage 0,6/1 kV01/01/20210009/21-----
S.I. 2016 No. 1101HD 604 S1:1994,
HD 604 S1:1994/A3:2005,
HD 604 S1:1994/A1:1997,
HD 604 S1:1994/A2:2002
0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations01/01/20210009/21-----
S.I. 2016 No. 1101HD 605 S2:2008,
HD 605 S2:2008/AC:2010
Electric cables - Additional test methods01/01/20210009/21-----
S.I. 2016 No. 1101HD 626 S1:1996,
HD 626 S1:1996/A1:1997,
HD 626 S1:1996/A2:2002
Overhead distribution cables of rated voltage Uo/U(Um): 0,6/1 (1,2) kV01/01/20210009/21-----
S.I. 2016 No. 1101HD 627 S1:1996,
HD 627 S1:1996/A1:2000,
HD 627 S1:1996/A2:2005
Multicore and multipair cables for installation above and below ground01/01/20210009/21-----
S.I. 2016 No. 1101HD 639 S1:2002,
HD 639 S1:2002/A1:2003,
HD 639 S1:2002/A2:2010,
HD 639 S1:2002/AC:2003
Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)01/01/20210009/21-----
S.I. 2016 No. 1101EN 50065-4-2:2001,
EN 50065-4-2:2001/A1:2003,
EN 50065-4-2:2001/A2:2005
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-2: Low voltage decoupling filters - Safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 50065-4-7:2005,
EN 50065-4-7:2005/AC:2006
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-7: Portable low voltage decoupling filters - Safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 50085-1:2005,
EN 50085-1:2005/A1:2013
Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 50085-2-1:2006,
EN 50085-2-1:2006/A1:2011
Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings01/01/20210009/21-----
S.I. 2016 No. 1101EN 50085-2-2:2008Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor01/01/20210009/21-----
S.I. 2016 No. 1101EN 50085-2-3:2010Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets01/01/20210009/21-----
S.I. 2016 No. 1101EN 50085-2-4:2009Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for service poles and service posts01/01/20210009/21-----
S.I. 2016 No. 1101EN 50106:2008Safety of household and similar electrical appliances - Particular rules for routine tests referring to appliances under the scope of EN 60335-101/01/20210009/21-----
S.I. 2016 No. 1101EN 50117-1:2002,
EN 50117-1:2002/A1:2006,
EN 50117-1:2002/A2:2013
Coaxial cables - Part 1: Generic specification01/01/20210009/21-----
S.I. 2016 No. 1101EN 50117-2-1:2005,
EN 50117-2-1:2005/A1:2008,
EN 50117-2-1:2005/A2:2013
Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz01/01/20210009/21-----
S.I. 2016 No. 1101EN 50117-2-2:2004,
EN 50117-2-2:2004/A1:2008,
EN 50117-2-2:2004/A2:2013
Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1 000 MHz01/01/20210009/21-----
S.I. 2016 No. 1101EN 50117-2-3:2004,
EN 50117-2-3:2004/A1:2008,
EN 50117-2-3:2004/A2:2013
Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz01/01/20210009/21-----
S.I. 2016 No. 1101EN 50117-2-4:2004,
EN 50117-2-4:2004/A1:2008,
EN 50117-2-4:2004/A2:2013
Coaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz01/01/20210009/21-----
S.I. 2016 No. 1101EN 50117-2-5:2004,
EN 50117-2-5:2004/AC:2012,
EN 50117-2-5:2004/A1:2008,
EN 50117-2-5:2004/A2:2013
Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz01/01/20210009/21-----
S.I. 2016 No. 1101EN 50117-3-1:2002Coaxial cables - Part 3-1: Sectional specifications for cables used in Telecom applications - Miniaturized cables used in digital communication systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 50117-4-1:2008,
EN 50117-4-1:2008/A1:2013
Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz01/01/20210009/21-----
S.I. 2016 No. 1101EN 50117-4-2:2015Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks01/01/20210009/21-----
S.I. 2016 No. 1101EN 50156-1:2015Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation01/01/20210009/21-----
S.I. 2016 No. 1101EN 50156-2:2015Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems01/01/20210009/21-----
S.I. 2016 No. 1101EN 50178:1997Electronic equipment for use in power installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 50214:2006,
EN 50214:2006/AC:2007
Flat polyvinyl chloride sheathed flexible cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50250:2002,
EN 50250:2002/A1:2015,
EN 50250:2002/AC:2007
Conversion adaptors for industrial use01/01/20210009/21-----
S.I. 2016 No. 1101EN 50274:2002,
EN 50274:2002/AC:2009
Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-1:2013Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-2-1:2013Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-2-2:2013Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-3-1:2013Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-3-2:2013Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-4-1:2013Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-4-2:2013Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-5-1:2013Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-5-2:2013Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-6-1:2013Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-6-2:2013Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-7:2005Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-8:2012Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-9-1:2012Multi-element metallic cables used in analogue and digital communication and control - Part 9-1: Sectional specification for screened cables characterised up to 1 000 MHz - Horizontal and building backbone cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-9-2:2015Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-10-1:2012Multi-element metallic cables used in analogue and digital communication and control - Part 10-1: Sectional specification for screened cables characterized up to 500 MHz - Horizontal floor and building backbone cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-10-2:2015Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-11-1:2012Multi-element metallic cables used in analogue and digital communication and control - Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz - Horizontal and building backbone cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50288-11-2:2015Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications01/01/20210009/21-----
S.I. 2016 No. 1101EN 50289-1-3:2001Communication cables - Specifications for test methods - Part 1-3: Electrical test methods - Dielectric strength01/01/20210009/21-----
S.I. 2016 No. 1101EN 50289-1-4:2001Communication cables - Specifications for test methods - Part 1-4: Electrical test methods - Insulation resistance01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-1:2005Communication cables - Part 2-1: Common design rules and construction01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-20:2001Communication cables - Part 2-20: Common design rules and construction - General01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-21:2001,
EN 50290-2-21:2001/A1:2007/AC:2016,
EN 50290-2-21:2001/A1:2007,
EN 50290-2-21:2001/AC:2003
Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-22:2001,
EN 50290-2-22:2001/A1:2007
Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-23:2013Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-24:2002,
EN 50290-2-24:2002/A1:2008
Communication cables - Part 2-24: Common design rules and construction - PE sheathing01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-25:2013Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-26:2002,
EN 50290-2-26:2002/A1:2007
Communication cables - Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-27:2002,
EN 50290-2-27:2002/A1:2007,
EN 50290-2-27:2002/A1:2007/AC:2010
Communication cables - Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-28:2002Communication cables - Part 2-28: Common design rules and construction - Filling compounds for filled cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-29:2002Communication cables - Part 2-29: Common design rules and construction - Cross-linked PE insulation compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-2-30:2002Communication cables - Part 2-30: Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-4-1:2014Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects01/01/20210009/21-----
S.I. 2016 No. 1101EN 50290-4-2:2014Communication cables - Part 4-2: General considerations for the use of cables - Guide to use01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-0:2011Insulating, sheathing and covering materials for low-voltage energy cables - Part 0: General introduction01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-1:2005Insulating, sheathing and covering materials for low voltage energy cables - Part 1: Cross-linked elastomeric insulating compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-2-1:2005,
EN 50363-2-1:2005/A1:2011
Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1: Cross-linked elastomeric sheathing compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-2-2:2005Insulating, sheathing and covering materials for low voltage energy cables - Part 2-2: Cross-linked elastomeric covering compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-3:2005,
EN 50363-3:2005/A1:2011
Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-4-1:2005Insulating, sheathing and covering materials for low voltage energy cables - Part 4-1: PVC sheathing compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-4-2:2005Insulating, sheathing and covering materials for low voltage energy cables - Part 4-2: PVC covering compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-5:2005,
EN 50363-5:2005/A1:2011
Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halogen-free, cross-linked insulating compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-6:2005,
EN 50363-6:2005/A1:2011
Insulating, sheathing and covering materials for low voltage energy cables - Part 6: Halogen-free, cross-linked sheathing compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-7:2005Insulating, sheathing and covering materials for low voltage energy cables - Part 7: Halogen-free, thermoplastic insulating compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-8:2005,
EN 50363-8:2005/A1:2011
Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-9-1:2005Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1: Miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC)01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-10-1:2005Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC)01/01/20210009/21-----
S.I. 2016 No. 1101EN 50363-10-2:2005Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane01/01/20210009/21-----
S.I. 2016 No. 1101EN 50364:2010Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications01/01/20210009/21-----
S.I. 2016 No. 1101EN 50369:2005Liquid tight sheathing systems for cable management01/01/20210009/21-----
S.I. 2016 No. 1101EN 50395:2005,
EN 50395:2005/A1:2011
Electrical test methods for low voltage energy cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50396:2005,
EN 50396:2005/A1:2011
Non electrical test methods for low voltage energy cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50406-1:2004End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50406-2:2004End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50407-1:2004Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50407-3:2014Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP01/01/20210009/21-----
S.I. 2016 No. 1101EN 50428:2005,
EN 50428:2005/A1:2007,
EN 50428:2005/A2:2009
Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)01/01/20210009/21-----
S.I. 2016 No. 1101EN 50441-1:2012Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 101/01/20210009/21-----
S.I. 2016 No. 1101EN 50441-2:2012Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 101/01/20210009/21-----
S.I. 2016 No. 1101EN 50441-3:2006Cables for indoor residential telecommunication installations - Part 3: Screened cables - Grade 301/01/20210009/21-----
S.I. 2016 No. 1101EN 50441-4:2012Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 301/01/20210009/21-----
S.I. 2016 No. 1101EN 50445:2008Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)01/01/20210009/21-----
S.I. 2016 No. 1101EN 50491-3:2009General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements01/01/20210009/21---19/01/20210009/21
S.I. 2016 No. 1101EN 50491-4-1:2012General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)01/01/20210009/21-----
S.I. 2016 No. 1101EN 50491-6-1:2014General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6-1: HBES installations - Installation and planning01/01/20210009/21-----
S.I. 2016 No. 1101EN 50497:2007Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 50520:2009Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-1:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-11:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-12:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-12: Cables for general applications - Cables with thermoplastic PVC insulation for extensible leads01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-21:2011,
EN 50525-2-21:2011/AC:2013
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-22:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-22: Cables for general applications - High flexibility braided cables with crosslinked elastomeric insulation01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-31:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-31: Cables for general applications - Single core non-sheathed cables with thermoplastic PVC insulation01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-41:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-41: Cables for general applications - Single core cables with crosslinked silicone rubber insulation01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-42:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-42: Cables for general applications - Single core non-sheathed cables with crosslinked EVA insulation01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-51:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-71:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-72:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-72: Cables for general applications - Flat divisible cables (cords) with thermoplastic PVC insulation01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-81:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-81: Cables for general applications - Cables with crosslinked elastomeric covering for arc welding01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-82:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-82: Cables for general applications - Cables with crosslinked elastomeric insulation for decorative chains01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-2-83:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-3-11:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-3-21:2011,
EN 50525-3-21:2011/AC:2013
Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-3-31:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-31: Cables with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke01/01/20210009/21-----
S.I. 2016 No. 1101EN 50525-3-41:2011Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-41: Cables with special fire performance - Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke01/01/20210009/21-----
S.I. 2016 No. 1101EN 50539-11:2013,
EN 50539-11:2013/A1:2014
Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 11: Requirements and tests for SPDs in photovoltaic applications01/01/20210009/21-----
S.I. 2016 No. 1101EN 50550:2011,
EN 50550:2011/AC:2012,
EN 50550:2011/A1:2014
Power frequency overvoltage protective device for household and similar applications (POP)01/01/20210009/21-----
S.I. 2016 No. 1101EN 50556:2011Road traffic signal systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 50557:2011Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 50565-1:2014Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 1: General guidance01/01/20210009/21-----
S.I. 2016 No. 1101EN 50565-2:2014Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 2: Specific guidance related to EN 50525 cable types01/01/20210009/21-----
S.I. 2016 No. 1101EN 50615:2015Household and similar electrical appliances - Safety - Particular requirements for devices for fire prevention and suppression for electric hobs (cooktops)01/01/20210009/21-----
S.I. 2016 No. 1101EN 50618:2014Electric cables for photovoltaic systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 50620:2017,
EN 50620:2017/A1:2019
Electric cables - Charging cables for electric vehicles01/01/20210009/21-----
S.I. 2016 No. 1101EN 60034-1:2010,
EN 60034-1:2010/AC:2010
Rotating electrical machines - Part 1: Rating and performance01/01/20210009/21-----
S.I. 2016 No. 1101EN 60034-5:2001,
EN 60034-5:2001/A1:2007
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification01/01/20210009/21-----
S.I. 2016 No. 1101EN 60034-6:1993Rotating electrical machines - Part 6: Methods of cooling (IC Code)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60034-7:1993,
EN 60034-7:1993/A1:2001
Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60034-8:2007,
EN 60034-8:2007/A1:2014
Rotating electrical machines - Part 8: Terminal markings and direction of rotation01/01/20210009/21-----
S.I. 2016 No. 1101EN 60034-9:2005,
EN 60034-9:2005/A1:2007
Rotating electrical machines - Part 9: Noise limits01/01/20210009/21-----
S.I. 2016 No. 1101EN 60034-11:2004Rotating electrical machines - Part 11: Thermal protection01/01/20210009/21-----
S.I. 2016 No. 1101EN 60034-12:2002,
EN 60034-12:2002/A1:2007
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60034-14:2004,
EN 60034-14:2004/A1:2007
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity01/01/20210009/21-----
S.I. 2016 No. 1101EN 60051-1:1998Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts01/01/20210009/21-----
S.I. 2016 No. 1101EN 60051-2:1989Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60051-3:1989,
EN 60051-3:1989/A1:1995
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60051-4:1989Direct acting indicating analogue electrical measuring instruments and their accessories - Part 4: Special requirements for frequency meters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60051-5:1989Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes01/01/20210009/21-----
S.I. 2016 No. 1101EN 60051-6:1989Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60051-7:1989Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for multi-function instruments01/01/20210009/21-----
S.I. 2016 No. 1101EN 60051-8:1989Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for accessories01/01/20210009/21-----
S.I. 2016 No. 1101EN 60051-9:1989,
EN 60051-9:1989/A1:1995,
EN 60051-9:1989/A2:1995
Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9: Recommended test methods01/01/20210009/21-----
S.I. 2016 No. 1101EN 60110-1:1998Power capacitors for induction heating installations - Part 1: General01/01/20210009/21-----
S.I. 2016 No. 1101EN 60127-1:2006,
EN 60127-1:2006/A1:2011,
EN 60127-1:2006/A2:2015
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links01/01/20210009/21-----
S.I. 2016 No. 1101EN 60127-2:2014Miniature fuses - Part 2: Cartridge fuse-links01/01/20210009/21-----
S.I. 2016 No. 1101EN 60127-3:1996,
EN 60127-3:1996/A2:2003,
EN 60127-3:1996/AC:1996
Miniature fuses - Part 3: Sub-miniature fuse-links01/01/20210009/21-----
S.I. 2016 No. 1101EN 60127-4:2005,
EN 60127-4:2005/A1:2009,
EN 60127-4:2005/A2:2013
Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types01/01/20210009/21-----
S.I. 2016 No. 1101EN 60127-6:2014Miniature fuses - Part 6: Fuse-holders for miniature fuse-links01/01/20210009/21-----
S.I. 2016 No. 1101EN 60127-7:2016Miniature fuses - Part 7: Miniature fuse-links for special applications01/01/20210009/21-----
S.I. 2016 No. 1101EN 60143-2:2013Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks01/01/20210009/21-----
S.I. 2016 No. 1101EN 60155:1995,
EN 60155:1995/A1:1995,
EN 60155:1995/A2:2007
Glow-starters for fluorescent lamps01/01/20210009/21-----
S.I. 2016 No. 1101EN 60204-1:2006,
EN 60204-1:2006/A1:2009,
EN 60204-1:2006/AC:2010
Safety of machinery - Electrical equipment of machines - Part 1: General requirements01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60204-1:2018Safety of machinery - Electrical equipment of machines - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60204-32:2008Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines01/01/20210009/21-----
S.I. 2016 No. 1101EN 60215:1989,
EN 60215:1989/A1:1992,
EN 60215:1989/A2:1994
Safety requirements for radio transmitting equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60228:2005,
EN 60228:2005/AC:2005
Conductors of insulated cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 60238:2004,
EN 60238:2004/A1:2008,
EN 60238:2004/A2:2011,
EN 60238:2004/AC:2005
Edison screw lampholders01/01/20210009/21---23/03/20210009/21
S.I. 2016 No. 1101EN IEC 60238:2018Edison screw lampholders01/01/20210009/21-----
S.I. 2016 No. 1101EN 60252-1:2011,
EN 60252-1:2011/A1:2013
AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation01/01/20210009/21-----
S.I. 2016 No. 1101EN 60252-2:2011,
EN 60252-2:2011/A1:2013
AC motor capacitors - Part 2: Motor start capacitors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60255-27:2014Measuring relays and protection equipment - Part 27: Product safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60269-1:2007,
EN 60269-1:2007/A1:2009,
EN 60269-1:2007/A2:2014
Low-voltage fuses - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101HD 60269-2:2013Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K01/01/20210009/21-----
S.I. 2016 No. 1101HD 60269-3:2010,
HD 60269-3:2010/A1:2013
Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F01/01/20210009/21-----
S.I. 2016 No. 1101EN 60269-4:2009,
EN 60269-4:2009/A1:2012
Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices01/01/20210009/21-----
S.I. 2016 No. 1101EN 60269-6:2011Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 60309-1:1999,
EN 60309-1:1999/A1:2007,
EN 60309-1:1999/A2:2012,
EN 60309-1:1999/A1:2007/AC:2014
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60309-2:1999,
EN 60309-2:1999/A1:2007,
EN 60309-2:1999/A2:2012
Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories01/01/20210009/21-----
S.I. 2016 No. 1101EN 60309-4:2007,
EN 60309-4:2007/A1:2012
Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock01/01/20210009/21-----
S.I. 2016 No. 1101EN 60320-1:2001,
EN 60320-1:2001/A1:2007
Appliance couplers for household and similar general purposes - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60320-2-1:2000Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60320-2-2:1998Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60320-2-4:2006,
EN 60320-2-4:2006/A1:2009
Appliance couplers for household and similar general purposes - Part 2-4: Appliance couplers dependent on appliance weight for engagement01/01/20210009/21-----
S.I. 2016 No. 1101EN 60332-1-1:2004,
EN 60332-1-1:2004/A1:2015
Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus01/01/20210009/21-----
S.I. 2016 No. 1101EN 60332-1-2:2004,
EN 60332-1-2:2004/A1:2015
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame01/01/20210009/21-----
S.I. 2016 No. 1101EN 60332-1-3:2004,
EN 60332-1-3:2004/A1:2015
Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles01/01/20210009/21-----
S.I. 2016 No. 1101EN 60332-2-1:2004Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus01/01/20210009/21-----
S.I. 2016 No. 1101EN 60332-2-2:2004Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame01/01/20210009/21-----
S.I. 2016 No. 1101EN 60332-3-10:2009Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus01/01/20210009/21-----
S.I. 2016 No. 1101EN 60332-3-21:2009Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R01/01/20210009/21-----
S.I. 2016 No. 1101EN 60332-3-22:2009Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A01/01/20210009/21-----
S.I. 2016 No. 1101EN 60332-3-23:2009Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B01/01/20210009/21-----
S.I. 2016 No. 1101EN 60332-3-24:2009Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C01/01/20210009/21-----
S.I. 2016 No. 1101EN 60332-3-25:2009Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-1:2012,
EN 60335-1:2012/AC:2014,
EN 60335-1:2012/A11:2014
Household and similar electrical appliances - Safety - Part 1: General requirements01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60335-1:2012,
EN 60335-1:2012/AC:2014,
EN 60335-1:2012/A11:2014,
EN 60335-1:2012/A13:2017
Household and similar electrical appliances - Safety - Part 1: General requirements01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-1:2012,
EN 60335-1:2012/AC:2014,
EN 60335-1:2012/A11:2014,
EN 60335-1:2012/A13:2017,
EN 60335-1:2012/A1:2019,
EN 60335-1:2012/A14:2019,
EN 60335-1:2012/A2:2019
Household and similar electrical appliances - Safety - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-2:2010,
EN 60335-2-2:2010/A11:2012,
EN 60335-2-2:2010/A1:2013
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-3:2016Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-4:2010,
EN 60335-2-4:2010/A1:2015
Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60335-2-4:2010,
EN 60335-2-4:2010/A1:2015,
EN 60335-2-4:2010/A11:2018
Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-4:2010,
EN 60335-2-4:2010/A1:2015,
EN 60335-2-4:2010/A11:2018,
EN 60335-2-4:2010/A2:2019
Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-5:2015Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-5:2015,
EN 60335-2-5:2015/A11:2019
Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-6:2015Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-7:2010,
EN 60335-2-7:2010/A11:2013,
EN 60335-2-7:2010/A1:2013
Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-7:2010,
EN 60335-2-7:2010/A11:2013,
EN 60335-2-7:2010/A1:2013,
EN 60335-2-7:2010/A2:2019
Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-8:2015,
EN 60335-2-8:2015/A1:2016
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-9:2003,
EN 60335-2-9:2003/A1:2004,
EN 60335-2-9:2003/A12:2007,
EN 60335-2-9:2003/A13:2010/AC:2011,
EN 60335-2-9:2003/A13:2010/AC:2012,
EN 60335-2-9:2003/A13:2010,
EN 60335-2-9:2003/A2:2006
Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances01/01/20210009/21Notice:

The application of the following parts of standard EN 60335-2-9:2003, as last amended by A13:2010, does not confer a presumption of conformity to the safety objectives laid down iparagraph 1(c) of Schedule 1 to S.I. 2016/1101, in conjunction with paragraph 2(b) of that Schedule:

— footnote b of Table Z101 in Section 11,

— the parts of Section 7.1 which refer to footnote b of Table Z101,

— the parts of Section 11.Z10x which refer to ventilation openings.
01/01/20210009/21--
S.I. 2016 No. 1101EN 60335-2-10:2003,
EN 60335-2-10:2003/A1:2008
Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-11:2010,
EN 60335-2-11:2010/A11:2012,
EN 60335-2-11:2010/A1:2015
Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-12:2003,
EN 60335-2-12:2003/A1:2008
Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-12:2003,
EN 60335-2-12:2003/A1:2008,
EN 60335-2-12:2003/A11:2019,
EN 60335-2-12:2003/A2:2019
Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-13:2010,
EN 60335-2-13:2010/A11:2012
Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-13:2010,
EN 60335-2-13:2010/A11:2012,
EN 60335-2-13:2010/A1:2019
Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-15:2002,
EN 60335-2-15:2002/A1:2005,
EN 60335-2-15:2002/A11:2012/AC:2013,
EN 60335-2-15:2002/A11:2012,
EN 60335-2-15:2002/A2:2008,
EN 60335-2-15:2002/AC:2005,
EN 60335-2-15:2002/AC:2006
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60335-2-15:2016,
EN 60335-2-15:2016/A11:2018
Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-16:2003,
EN 60335-2-16:2003/A1:2008,
EN 60335-2-16:2003/A2:2012
Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60335-2-16:2003,
EN 60335-2-16:2003/A1:2008,
EN 60335-2-16:2003/A2:2012,
EN 60335-2-16:2003/A11:2018
Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-17:2013Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-17:2013,
EN 60335-2-17:2013/A11:2019
Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-21:2003,
EN 60335-2-21:2003/A1:2005,
EN 60335-2-21:2003/A2:2008,
EN 60335-2-21:2003/AC:2007,
EN 60335-2-21:2003/AC:2010
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-23:2003,
EN 60335-2-23:2003/A11:2010/AC:2012,
EN 60335-2-23:2003/A11:2010,
EN 60335-2-23:2003/A1:2008,
EN 60335-2-23:2003/A2:2015
Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-25:2012,
EN 60335-2-25:2012/A1:2015,
EN 60335-2-25:2012/A2:2016
Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-26:2003,
EN 60335-2-26:2003/A1:2008
Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-27:2013Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-28:2003,
EN 60335-2-28:2003/A1:2008
Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60335-2-28:2003,
EN 60335-2-28:2003/A1:2008,
EN 60335-2-28:2003/A11:2018
Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-29:2004,
EN 60335-2-29:2004/A2:2010
Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60335-2-29:2004,
EN 60335-2-29:2004/A2:2010,
EN 60335-2-29:2004/A11:2018
Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-30:2009,
EN 60335-2-30:2009/A11:2012,
EN 60335-2-30:2009/AC:2010,
EN 60335-2-30:2009/AC:2014
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-31:2014Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-32:2003,
EN 60335-2-32:2003/A1:2008,
EN 60335-2-32:2003/A2:2015
Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-34:2013Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-35:2016Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-35:2016,
EN 60335-2-35:2016/A1:2019
Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-36:2002,
EN 60335-2-36:2002/A1:2004,
EN 60335-2-36:2002/A11:2012,
EN 60335-2-36:2002/A2:2008,
EN 60335-2-36:2002/AC:2007
Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-37:2002,
EN 60335-2-37:2002/A1:2008,
EN 60335-2-37:2002/A11:2012,
EN 60335-2-37:2002/AC:2007
Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-38:2003,
EN 60335-2-38:2003/A1:2008,
EN 60335-2-38:2003/AC:2007
Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-39:2003,
EN 60335-2-39:2003/A1:2004,
EN 60335-2-39:2003/A2:2008,
EN 60335-2-39:2003/AC:2007
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-40:2003,
EN 60335-2-40:2003/A11:2004,
EN 60335-2-40:2003/A12:2005,
EN 60335-2-40:2003/A1:2006,
EN 60335-2-40:2003/A13:2012/AC:2013,
EN 60335-2-40:2003/A13:2012,
EN 60335-2-40:2003/A2:2009,
EN 60335-2-40:2003/AC:2006,
EN 60335-2-40:2003/AC:2010
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-41:2003,
EN 60335-2-41:2003/A1:2004,
EN 60335-2-41:2003/A2:2010
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-42:2003,
EN 60335-2-42:2003/A1:2008,
EN 60335-2-42:2003/A11:2012,
EN 60335-2-42:2003/AC:2007
Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-43:2003,
EN 60335-2-43:2003/A1:2006,
EN 60335-2-43:2003/A2:2008
Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-44:2002,
EN 60335-2-44:2002/A1:2008,
EN 60335-2-44:2002/A2:2012
Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-45:2002,
EN 60335-2-45:2002/A1:2008,
EN 60335-2-45:2002/A2:2012
Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-47:2003,
EN 60335-2-47:2003/A1:2008,
EN 60335-2-47:2003/A11:2012,
EN 60335-2-47:2003/AC:2007
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-47:2003,
EN 60335-2-47:2003/A1:2008,
EN 60335-2-47:2003/A11:2012,
EN 60335-2-47:2003/AC:2007,
EN 60335-2-47:2003/A2:2019
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-48:2003,
EN 60335-2-48:2003/A1:2008,
EN 60335-2-48:2003/A11:2012,
EN 60335-2-48:2003/AC:2007
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-48:2003,
EN 60335-2-48:2003/A1:2008,
EN 60335-2-48:2003/A11:2012,
EN 60335-2-48:2003/AC:2007,
EN 60335-2-48:2003/A2:2019
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-49:2003,
EN 60335-2-49:2003/A1:2008,
EN 60335-2-49:2003/A11:2012,
EN 60335-2-49:2003/AC:2007
Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-49:2003,
EN 60335-2-49:2003/A1:2008,
EN 60335-2-49:2003/A11:2012,
EN 60335-2-49:2003/AC:2007,
EN 60335-2-49:2003/A2:2019
Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-50:2003,
EN 60335-2-50:2003/A1:2008,
EN 60335-2-50:2003/AC:2007
Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-51:2003,
EN 60335-2-51:2003/A1:2008,
EN 60335-2-51:2003/A2:2012
Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-52:2003,
EN 60335-2-52:2003/A11:2010/AC:2012,
EN 60335-2-52:2003/A11:2010,
EN 60335-2-52:2003/A1:2008
Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-52:2003,
EN 60335-2-52:2003/A11:2010/AC:2012,
EN 60335-2-52:2003/A11:2010,
EN 60335-2-52:2003/A1:2008,
EN 60335-2-52:2003/A12:2019
Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-53:2011Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-54:2008,
EN 60335-2-54:2008/A11:2012/AC:2015,
EN 60335-2-54:2008/A11:2012,
EN 60335-2-54:2008/A1:2015
Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-55:2003,
EN 60335-2-55:2003/A1:2008
Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60335-2-55:2003,
EN 60335-2-55:2003/A1:2008,
EN 60335-2-55:2003/A11:2018
Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-56:2003,
EN 60335-2-56:2003/A1:2008,
EN 60335-2-56:2003/A2:2014
Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-58:2005Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-59:2003,
EN 60335-2-59:2003/A1:2006,
EN 60335-2-59:2003/A2:2009
Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60335-2-59:2003,
EN 60335-2-59:2003/A1:2006,
EN 60335-2-59:2003/A2:2009,
EN 60335-2-59:2003/A11:2018
Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-60:2003,
EN 60335-2-60:2003/A1:2005,
EN 60335-2-60:2003/A12:2010,
EN 60335-2-60:2003/A11:2010,
EN 60335-2-60:2003/A2:2008
Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-61:2003,
EN 60335-2-61:2003/A1:2005,
EN 60335-2-61:2003/A2:2008
Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-61:2003,
EN 60335-2-61:2003/A1:2005,
EN 60335-2-61:2003/A2:2008,
EN 60335-2-61:2003/A11:2019
Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-62:2003,
EN 60335-2-62:2003/A1:2008,
EN 60335-2-62:2003/AC:2007
Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-65:2003,
EN 60335-2-65:2003/A1:2008,
EN 60335-2-65:2003/A11:2012
Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-66:2003,
EN 60335-2-66:2003/A1:2008,
EN 60335-2-66:2003/A2:2012
Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-66:2003,
EN 60335-2-66:2003/A1:2008,
EN 60335-2-66:2003/A2:2012,
EN 60335-2-66:2003/A11:2019
Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-70:2002Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-71:2003,
EN 60335-2-71:2003/A1:2007
Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-73:2003,
EN 60335-2-73:2003/A1:2006,
EN 60335-2-73:2003/A2:2009
Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-74:2003,
EN 60335-2-74:2003/A1:2006,
EN 60335-2-74:2003/A2:2009
Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60335-2-74:2003,
EN 60335-2-74:2003/A1:2006,
EN 60335-2-74:2003/A2:2009,
EN 60335-2-74:2003/A11:2018
Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-75:2004,
EN 60335-2-75:2004/A11:2006,
EN 60335-2-75:2004/A1:2005,
EN 60335-2-75:2004/A12:2010,
EN 60335-2-75:2004/A2:2008
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-78:2003,
EN 60335-2-78:2003/A1:2008
Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-80:2003,
EN 60335-2-80:2003/A1:2004,
EN 60335-2-80:2003/A2:2009
+6Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-81:2003,
EN 60335-2-81:2003/A1:2007,
EN 60335-2-81:2003/A2:2012
Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-82:2003,
EN 60335-2-82:2003/A1:2008
Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-83:2002,
EN 60335-2-83:2002/A1:2008
Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-84:2003,
EN 60335-2-84:2003/A1:2008
Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-84:2003,
EN 60335-2-84:2003/A1:2008,
EN 60335-2-84:2003/A2:2019
Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-85:2003,
EN 60335-2-85:2003/A1:2008
Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60335-2-85:2003,
EN 60335-2-85:2003/A1:2008,
EN 60335-2-85:2003/A11:2018
Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-86:2003,
EN 60335-2-86:2003/A1:2005,
EN 60335-2-86:2003/A11:2016,
EN 60335-2-86:2003/A2:2016
Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-87:2002,
EN 60335-2-87:2002/A1:2007
Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-87:2002,
EN 60335-2-87:2002/A1:2007,
EN 60335-2-87:2002/A2:2019
Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-88:2002Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-90:2006,
EN 60335-2-90:2006/A1:2010
Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-96:2002,
EN 60335-2-96:2002/A1:2004,
EN 60335-2-96:2002/A2:2009
Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-97:2006,
EN 60335-2-97:2006/A11:2008,
EN 60335-2-97:2006/A12:2015,
EN 60335-2-97:2006/A2:2010
Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-98:2003,
EN 60335-2-98:2003/A1:2005,
EN 60335-2-98:2003/A2:2008
Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60335-2-98:2003,
EN 60335-2-98:2003/A1:2005,
EN 60335-2-98:2003/A2:2008,
EN 60335-2-98:2003/A11:2019
Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-99:2003Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-101:2002,
EN 60335-2-101:2002/A1:2008,
EN 60335-2-101:2002/A2:2014
Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-102:2016Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-105:2005,
EN 60335-2-105:2005/A11:2010,
EN 60335-2-105:2005/A1:2008
Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-106:2007Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-108:2008Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60335-2-109:2010Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60335-2-109:2010,
EN 60335-2-109:2010/A1:2018,
EN 60335-2-109:2010/A2:2018
Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances01/01/20210009/21-----
S.I. 2016 No. 1101EN 60358-1:2012,
EN 60358-1:2012/AC:2013
Coupling capacitors and capacitor dividers - Part 1: General rules01/01/20210009/21-----
S.I. 2016 No. 1101EN 60360:1998Standard method of measurement of lamp cap temperature rise01/01/20210009/21-----
S.I. 2016 No. 1101EN 60399:2004,
EN 60399:2004/A1:2008
Barrel thread for lampholders with shade holder ring01/01/20210009/21-----
S.I. 2016 No. 1101EN 60400:2017Lampholders for tubular fluorescent lamps and starterholders01/01/20210009/21-----
S.I. 2016 No. 1101EN 60423:2007Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings01/01/20210009/21-----
S.I. 2016 No. 1101EN 60432-1:2000,
EN 60432-1:2000/A1:2005,
EN 60432-1:2000/A2:2012
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes01/01/20210009/21-----
S.I. 2016 No. 1101EN 60432-2:2000,
EN 60432-2:2000/A1:2005,
EN 60432-2:2000/A2:2012
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes01/01/20210009/21-----
S.I. 2016 No. 1101EN 60432-3:2013Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60477:1997,
EN 60477:1997/A1:1997
Laboratory d.c. resistors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60477-2:1997,
EN 60477-2:1997/A1:1997
Laboratory resistors - Part 2: Laboratory a.c. resistors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60519-1:2015Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60519-2:2006Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60519-3:2005Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 60519-4:2013Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 60519-6:2011Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60519-7:2008Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns01/01/20210009/21-----
S.I. 2016 No. 1101EN 60519-8:2005Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces01/01/20210009/21-----
S.I. 2016 No. 1101EN 60519-9:2005Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 60519-10:2013Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications01/01/20210009/21-----
S.I. 2016 No. 1101EN 60519-12:2013Safety in electroheating installations - Part 12: Particular requirements for infrared electroheating installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 60519-21:2009Safety in electroheat installations - Part 21: Particular requirements for resistance heating equipment - Heating and melting glass equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60523:1993,
EN 60523:1993/A2:1997
Direct-current potentiometers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60524:1993,
EN 60524:1993/A2:1997
Direct-current resistive volt ratio boxes01/01/20210009/21-----
S.I. 2016 No. 1101EN 60529:1991,
EN 60529:1991/A1:2000,
EN 60529:1991/A2:2013,
EN 60529:1991/AC:1993,
EN 60529:1991/AC:2016-12,
EN 60529:1991/A2:2013/AC:2019-02
Degrees of protection provided by enclosures (IP Code)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60564:1993,
EN 60564:1993/A2:1997
D.C. bridges for measuring resistance01/01/20210009/21-----
S.I. 2016 No. 1101EN 60570:2003Electrical supply track systems for luminaires01/01/20210009/21---18/05/20210009/21
S.I. 2016 No. 1101EN 60570:2003,
EN 60570:2003/A1:2018
Electrical supply track systems for luminaires01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-1:2015,
EN 60598-1:2015/AC:2015,
EN 60598-1:2015/AC:2016
Luminaires - Part 1: General requirements and tests01/01/20210009/21---23/02/20210009/21
S.I. 2016 No. 1101EN 60598-1:2015,
EN 60598-1:2015/AC:2015,
EN 60598-1:2015/AC:2016,
EN 60598-1:2015/AC:2017-05,
EN 60598-1:2015/A1:2018
Luminaires - Part 1: General requirements and tests01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-1:1989Luminaires - Part 2: Particular requirements - Section 1: Fixed general purpose luminaires01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-2:2012Luminaires - Part 2-2: Particular requirements - Recessed luminaires01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-3:2003,
EN 60598-2-3:2003/A1:2011,
EN 60598-2-3:2003/AC:2005
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-4:1997Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires01/01/20210009/21---30/03/20210009/21
S.I. 2016 No. 1101EN 60598-2-4:2018Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-5:2015Luminaires - Part 2-5: Particular requirements - Floodlights01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-7:1989,
EN 60598-2-7:1989/A13:1997,
EN 60598-2-7:1989/A2:1996,
EN 60598-2-7:1989/A2:1996/AC:1999
Luminaires - Part 2: Particular requirements - Section 7: Portable luminaires for garden use01/01/20210009/21---30/03/20210009/21
S.I. 2016 No. 1101EN 60598-2-8:2013Luminaires - Part 2-8: Particular requirements - Handlamps01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-9:1989,
EN 60598-2-9:1989/A1:1994
Luminaires - Part 2: Particular requirements - Section 9: Photo and film luminaires (non-professional)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-10:2003,
EN 60598-2-10:2003/AC:2005
Luminaires - Part 2-10: Particular requirements - Portable luminaires for children01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-11:2013Luminaires - Part 2-11: Particular requirements - Aquarium luminaires01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-12:2013Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-13:2006,
EN 60598-2-13:2006/A1:2012,
EN 60598-2-13:2006/AC:2006
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-14:2009Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-17:1989,
EN 60598-2-17:1989/A2:1991
Luminaires - Part 2: Particular requirements - Section 17: Luminaires for stage lighting, television film and photographic studios (outdoor and indoor)01/01/20210009/21---23/03/20210009/21
S.I. 2016 No. 1101EN IEC 60598-2-17:2018Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-19:1989,
EN 60598-2-19:1989/A2:1998,
EN 60598-2-19:1989/AC:2005
Luminaires - Part 2: Particular requirements - Section 19: Air-handling luminaires (safety requirements)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-20:2015Luminaires - Part 2-20: Particular requirements - Lighting chains01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-20:2015,
EN 60598-2-20:2015/AC:2017-01
Luminaires - Part 2-20: Particular requirements - Lighting chains01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-21:2015Luminaires - Part 2-21: Particular requirements - Rope lights01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-21:2015,
EN 60598-2-21:2015/AC:2017-01
Luminaires - Part 2-21: Particular requirements - Rope lights01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-22:2014,
EN 60598-2-22:2014/AC:2015,
EN 60598-2-22:2014/AC:2016-05,
EN 60598-2-22:2014/AC:2016-09
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-23:1996,
EN 60598-2-23:1996/A1:2000,
EN 60598-2-23:1996/AC:1997
Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for filament lamps01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-24:2013Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures01/01/20210009/21-----
S.I. 2016 No. 1101EN 60598-2-25:1994,
EN 60598-2-25:1994/A1:2004
Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings01/01/20210009/21-----
S.I. 2016 No. 1101EN 60618:1997,
EN 60618:1997/A2:1997
Inductive voltage dividers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60645-1:2015Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone audiometry01/01/20210009/21-----
S.I. 2016 No. 1101EN 60645-3:2007Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration01/01/20210009/21-----
S.I. 2016 No. 1101EN 60645-6:2010Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions01/01/20210009/21-----
S.I. 2016 No. 1101EN 60645-7:2010Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses01/01/20210009/21-----
S.I. 2016 No. 1101EN 60664-1:2007Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests01/01/20210009/21-----
S.I. 2016 No. 1101EN 60664-3:2003,
EN 60664-3:2003/A1:2010
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution01/01/20210009/21-----
S.I. 2016 No. 1101EN 60664-4:2006,
EN 60664-4:2006/AC:2006
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress01/01/20210009/21-----
S.I. 2016 No. 1101EN 60669-1:2018Switches for household and similar fixed electrical installations - Part 1: General requirements01/01/20210009/21---03/02/20210009/21
S.I. 2016 No. 1101EN 60669-1:2018,
EN 60669-1:2018/AC:2018-11
Switches for household and similar fixed electrical installations - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60669-2-1:2004,
EN 60669-2-1:2004/A1:2009,
EN 60669-2-1:2004/A12:2010,
EN 60669-2-1:2004/AC:2007
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches01/01/20210009/21-----
S.I. 2016 No. 1101EN 60669-2-2:2006Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60669-2-3:2006Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time delay switches (TDS)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60669-2-4:2005Switches for household and similar fixed electrical installations - Part 2-4: Particular requirements - Isolating switches01/01/20210009/21-----
S.I. 2016 No. 1101EN 60669-2-6:2012Switches for household and similar fixed electrical installations - Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires01/01/20210009/21-----
S.I. 2016 No. 1101EN 60670-1:2005,
EN 60670-1:2005/A1:2013,
EN 60670-1:2005/AC:2007,
EN 60670-1:2005/AC:2010
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60670-21:2007Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means01/01/20210009/21-----
S.I. 2016 No. 1101EN 60670-22:2006Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures01/01/20210009/21-----
S.I. 2016 No. 1101EN 60670-23:2008Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures01/01/20210009/21-----
S.I. 2016 No. 1101EN 60670-24:2013Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60688:2013Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals01/01/20210009/21-----
S.I. 2016 No. 1101EN 60691:2003,
EN 60691:2003/A1:2007,
EN 60691:2003/A2:2010
Thermal-links - Requirements and application guide01/01/20210009/21-----
S.I. 2016 No. 1101EN 60691:2016,
EN 60691:2016/A1:2019
Thermal-links - Requirements and application guide01/01/20210009/21-----
S.I. 2016 No. 1101EN 60695-2-10:2013Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure01/01/20210009/21-----
S.I. 2016 No. 1101EN 60695-2-11:2014Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60695-10-2:2014Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method01/01/20210009/21-----
S.I. 2016 No. 1101EN 60695-10-3:2002Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test01/01/20210009/21-----
S.I. 2016 No. 1101EN 60695-11-2:2014Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidance01/01/20210009/21-----
S.I. 2016 No. 1101EN 60695-11-3:2012Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods01/01/20210009/21-----
S.I. 2016 No. 1101EN 60695-11-4:2011Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method01/01/20210009/21-----
S.I. 2016 No. 1101EN 60695-11-5:2005Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance01/01/20210009/21-----
S.I. 2016 No. 1101EN 60695-11-10:2013,
EN 60695-11-10:2013/AC:2014
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods01/01/20210009/21-----
S.I. 2016 No. 1101EN 60695-11-20:2015,
EN 60695-11-20:2015/AC:2016
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method01/01/20210009/21-----
S.I. 2016 No. 1101EN 60702-1:2002,
EN 60702-1:2002/A1:2015
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 60702-2:2002,
EN 60702-2:2002/A1:2015
Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations01/01/20210009/21-----
S.I. 2016 No. 1101EN 60715:2001Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60715:2017Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories01/01/20210009/21-----
S.I. 2016 No. 1101EN 60719:1993Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V01/01/20210009/21-----
S.I. 2016 No. 1101EN 60728-11:2010Cable networks for television signals, sound signals and interactive services - Part 11: Safety01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60728-11:2017,
EN 60728-11:2017/A11:2018
Cable networks for television signals, sound signals and interactive services - Part 11: Safety01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-1:2011Automatic electrical controls for household and similar use - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-2:2002,
EN 60730-2-2:2002/A11:2005,
EN 60730-2-2:2002/A1:2006
Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-3:2007Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-4:2007Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-5:2015Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-6:2016Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-7:2010,
EN 60730-2-7:2010/AC:2011
Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-8:2002,
EN 60730-2-8:2002/A1:2003
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-9:2010Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-10:2007Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-11:2008Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-12:2006,
EN 60730-2-12:2006/A11:2008
Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-13:2008Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-14:1997,
EN 60730-2-14:1997/A11:2005,
EN 60730-2-14:1997/A1:2001,
EN 60730-2-14:1997/A2:2008
Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-15:2010Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls01/01/20210009/21-----
S.I. 2016 No. 1101EN 60730-2-19:2002,
EN 60730-2-19:2002/A11:2005,
EN 60730-2-19:2002/A2:2008
Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60754-1:2014Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content01/01/20210009/21-----
S.I. 2016 No. 1101EN 60754-2:2014Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity01/01/20210009/21-----
S.I. 2016 No. 1101EN 60799:1998Electrical accessories - Cord sets and interconnection cord sets01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-100:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-201:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-202:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-203:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-301:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-302:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-401:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-402:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-403:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-404:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-405:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-406:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-407:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-408:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-409:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-410:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-411:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-412:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-501:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-502:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-503:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-504:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-505:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-506:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-507:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-508:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-509:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-510:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-511:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-512:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-513:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-601:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-602:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-603:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-604:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-605:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-606:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density01/01/20210009/21-----
S.I. 2016 No. 1101EN 60811-607:2012Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene01/01/20210009/21-----
S.I. 2016 No. 1101EN 60825-1:2014Safety of laser products - Part 1: Equipment classification and requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60825-2:2004,
EN 60825-2:2004/A1:2007,
EN 60825-2:2004/A2:2010
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60825-4:2006,
EN 60825-4:2006/A1:2008,
EN 60825-4:2006/A2:2011
Safety of laser products - Part 4: Laser guards01/01/20210009/21-----
S.I. 2016 No. 1101EN 60825-12:2004Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information01/01/20210009/21-----
S.I. 2016 No. 1101EN 60831-1:2014,
EN 60831-1:2014/AC:2014
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation01/01/20210009/21-----
S.I. 2016 No. 1101EN 60831-2:2014Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2: Ageing test, self-healing test and destruction test01/01/20210009/21-----
S.I. 2016 No. 1101EN 60838-1:2004,
EN 60838-1:2004/A1:2008,
EN 60838-1:2004/A2:2011
Miscellaneous lampholders - Part 1: General requirements and tests01/01/20210009/21-----
S.I. 2016 No. 1101EN 60838-2-1:1996,
EN 60838-2-1:1996/A1:1998,
EN 60838-2-1:1996/A2:2004
Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S1401/01/20210009/21-----
S.I. 2016 No. 1101EN 60838-2-2:2006,
EN 60838-2-2:2006/A1:2012
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules01/01/20210009/21-----
S.I. 2016 No. 1101EN 60898-1:2003,
EN 60898-1:2003/A1:2004,
EN 60898-1:2003/A11:2005,
EN 60898-1:2003/A13:2012,
EN 60898-1:2003/AC:2004
Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60898-1:2019Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation01/01/20210009/21-----
S.I. 2016 No. 1101EN 60898-2:2006Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation01/01/20210009/21-----
S.I. 2016 No. 1101EN 60931-1:1996,
EN 60931-1:1996/A1:2003
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation01/01/20210009/21-----
S.I. 2016 No. 1101EN 60931-2:1996Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test and destruction test01/01/20210009/21-----
S.I. 2016 No. 1101EN 60931-3:1996Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 3: Internal fuses01/01/20210009/21-----
S.I. 2016 No. 1101EN 60934:2001,
EN 60934:2001/A1:2007,
EN 60934:2001/A2:2013
Circuit-breakers for equipment (CBE)01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN IEC 60934:2019Circuit breakers for equipment (CBE)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-1:2007,
EN 60947-1:2007/A1:2011,
EN 60947-1:2007/A2:2014
Low-voltage switchgear and controlgear - Part 1: General rules01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-2:2006,
EN 60947-2:2006/A1:2009,
EN 60947-2:2006/A2:2013
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60947-2:2017Low-voltage switchgear and controlgear - Part 2: Circuit-breakers01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-3:2009,
EN 60947-3:2009/A1:2012,
EN 60947-3:2009/A2:2015
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-4-1:2010,
EN 60947-4-1:2010/A1:2012
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-4-2:2012Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-4-3:2014Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-5-1:2004,
EN 60947-5-1:2004/A1:2009,
EN 60947-5-1:2004/AC:2004,
EN 60947-5-1:2004/AC:2005
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60947-5-1:2017Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-5-2:2007,
EN 60947-5-2:2007/A1:2012
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-5-3:1999,
EN 60947-5-3:1999/A1:2005
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-5-4:2003Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 60947-5-4:2003,
EN 60947-5-4:2003/A1:2019
Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-5-5:1997,
EN 60947-5-5:1997/A1:2005,
EN 60947-5-5:1997/A11:2013
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 60947-5-5:1997,
EN 60947-5-5:1997/A1:2005,
EN 60947-5-5:1997/A11:2013,
EN 60947-5-5:1997/A2:2017
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-5-7:2003Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-5-8:2006Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-5-9:2007Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-6-1:2005,
EN 60947-6-1:2005/A1:2014
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-6-2:2003,
EN 60947-6-2:2003/A1:2007
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-7-1:2009Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-7-2:2009Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-7-3:2009Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks01/01/20210009/21-----
S.I. 2016 No. 1101EN 60947-8:2003,
EN 60947-8:2003/A1:2006,
EN 60947-8:2003/A2:2012
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines01/01/20210009/21-----
S.I. 2016 No. 1101EN IEC 60947-9-1:2019Low-voltage switchgear and controlgear - Part 9-1: Active arc-fault mitigation systems - Arc quenching devices01/01/20210009/21-----
S.I. 2016 No. 1101EN 60950-21:2003Information technology equipment - Safety - Part 21: Remote power feeding01/01/20210009/21-----
S.I. 2016 No. 1101EN 60950-22:2006,
EN 60950-22:2006/AC:2008
Information technology equipment - Safety - Part 22: Equipment installed outdoors01/01/20210009/21-----
S.I. 2016 No. 1101EN 60950-23:2006,
EN 60950-23:2006/AC:2008
Information technology equipment - Safety - Part 23: Large data storage equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60968:2015Self-ballasted fluorescent lamps for general lighting services - Safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60974-1:2012Arc welding equipment - Part 1: Welding power sources01/01/20210009/21-----
S.I. 2016 No. 1101EN 60974-2:2013Arc welding equipment - Part 2: Liquid cooling systems01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN IEC 60974-2:2019Arc welding equipment - Part 2: Liquid cooling systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 60974-3:2014Arc welding equipment - Part 3: Arc striking and stabilizing devices01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN IEC 60974-3:2019Arc welding equipment - Part 3: Arc striking and stabilizing devices01/01/20210009/21-----
S.I. 2016 No. 1101EN 60974-5:2013Arc welding equipment - Part 5: Wire feeders01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN IEC 60974-5:2019Arc welding equipment - Part 5: Wire feeders01/01/20210009/21-----
S.I. 2016 No. 1101EN 60974-6:2016Arc welding equipment - Part 6: Limited duty equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 60974-7:2013Arc welding equipment - Part 7:Torches01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN IEC 60974-7:2019Arc welding equipment - Part 7: Torches01/01/20210009/21-----
S.I. 2016 No. 1101EN 60974-8:2009Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 60974-11:2010Arc welding equipment - Part 11: Electrode holders01/01/20210009/21-----
S.I. 2016 No. 1101EN 60974-12:2011Arc welding equipment - Part 12: Coupling devices for welding cables01/01/20210009/21-----
S.I. 2016 No. 1101EN 60974-13:2011Arc welding equipment - Part 13: Welding clamp01/01/20210009/21-----
S.I. 2016 No. 1101EN 60998-1:2004Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 60998-2-1:2004Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units01/01/20210009/21-----
S.I. 2016 No. 1101EN 60998-2-2:2004Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units01/01/20210009/21-----
S.I. 2016 No. 1101EN 60998-2-3:2004Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units01/01/20210009/21-----
S.I. 2016 No. 1101EN 60998-2-4:2005Connecting devices for low voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices01/01/20210009/21-----
S.I. 2016 No. 1101EN 60999-1:2000Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included)01/01/20210009/21-----
S.I. 2016 No. 1101EN 60999-2:2003Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included)01/01/20210009/21-----
S.I. 2016 No. 1101EN 61008-1:2012,
EN 61008-1:2012/A1:2014,
EN 61008-1:2012/A11:2015,
EN 61008-1:2012/A2:2014
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 61008-1:2012,
EN 61008-1:2012/A1:2014,
EN 61008-1:2012/A11:2015,
EN 61008-1:2012/A2:2014,
EN 61008-1:2012/A1:2014/AC:2016-06,
EN 61008-1:2012/A12:2017
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules01/01/20210009/21-----
S.I. 2016 No. 1101EN 61008-2-1:1994,
EN 61008-2-1:1994/A11:1998,
EN 61008-2-1:1994/A11:1998/AC:1999
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage01/01/20210009/21-----
S.I. 2016 No. 1101EN 61009-1:2012,
EN 61009-1:2012/A1:2014,
EN 61009-1:2012/A11:2015,
EN 61009-1:2012/A2:2014
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules01/01/20210009/21-----
S.I. 2016 No. 1101EN 61009-2-1:1994,
EN 61009-2-1:1994/A11:1998,
EN 61009-2-1:1994/A11:1998/AC:1999
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-1:2010,
EN 61010-1-2010/A1:2019/AC:2019-04,
EN 61010-1:2010/A1:2019
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-2-010:2014Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-2-020:2006Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-2-030:2010Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-2-032:2012Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-2-033:2012Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-2-040:2005Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-2-051:2015Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-2-061:2015Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-2-081:2015Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-2-091:2012,
EN 61010-2-091:2012/AC:2013
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-2-201:2013,
EN 61010-2-201:2013/AC:2013
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN IEC 61010-2-201:2018Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 61010-031:2015Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test01/01/20210009/21-----
S.I. 2016 No. 1101EN 61028:1993,
EN 61028:1993/A2:1997
Electrical measuring instruments - X-Y recorders01/01/20210009/21-----
S.I. 2016 No. 1101EN 61034-1:2005,
EN 61034-1:2005/A1:2014
Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus01/01/20210009/21-----
S.I. 2016 No. 1101EN 61034-2:2005,
EN 61034-2:2005/A1:2013
Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61048:2006,
EN 61048:2006/A1:2016
Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61050:1992,
EN 61050:1992/A1:1995
Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (generally called neon-transformers) - General and safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61058-1:2002,
EN 61058-1:2002/A2:2008
Switches for appliances - Part 1: General requirements01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN IEC 61058-1:2018Switches for appliances - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61058-2-1:2011Switches for appliances - Part 2-1: Particular requirements for cord switches01/01/20210009/21-----
S.I. 2016 No. 1101EN 61058-2-4:2005Switches for appliances - Part 2-4: Particular requirements for independently mounted switches01/01/20210009/21-----
S.I. 2016 No. 1101EN 61058-2-5:2011Switches for appliances - Part 2-5: Particular requirements for change-over selectors01/01/20210009/21-----
S.I. 2016 No. 1101EN 61071:2007Capacitors for power electronics01/01/20210009/21-----
S.I. 2016 No. 1101EN 61095:2009Electromechanical contactors for household and similar purposes01/01/20210009/21-----
S.I. 2016 No. 1101EN 61131-2:2007Programmable controllers - Part 2: Equipment requirements and tests01/01/20210009/21-----
S.I. 2016 No. 1101EN 61138:2007Cables for portable earthing and short-circuiting equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 61140:2002,
EN 61140:2002/A1:2006
Protection against electric shock - Common aspects for installation and equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 61143-1:1994,
EN 61143-1:1994/A1:1997
Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61143-2:1994Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods01/01/20210009/21-----
S.I. 2016 No. 1101EN 61184:2017Bayonet lampholders01/01/20210009/21-----
S.I. 2016 No. 1101EN 61187:1994,
EN 61187:1994/AC:1995
Electrical and electronic measuring equipment - Documentation01/01/20210009/21-----
S.I. 2016 No. 1101EN 61195:1999,
EN 61195:1999/A1:2013,
EN 61195:1999/A2:2015
Double-capped fluorescent lamps - Safety specifications01/01/20210009/21-----
S.I. 2016 No. 1101EN 61199:2011,
EN 61199:2011/A1:2013,
EN 61199:2011/A2:2015
Single-capped fluorescent lamps - Safety specifications01/01/20210009/21-----
S.I. 2016 No. 1101EN 61204:1995Low-voltage power supply devices, d.c. output - Performance characteristics01/01/20210009/21-----
S.I. 2016 No. 1101EN 61204-7:2006,
EN 61204-7:2006/A11:2009
Low voltage power supplies, d.c. output - Part 7: Safety requirements01/01/20210009/21---16/03/20210009/21
S.I. 2016 No. 1101EN IEC 61204-7:2018Low-voltage switch mode power supplies - Part 7: Safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61210:2010Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61230:2008Live working - Portable equipment for earthing or earthing and short-circuiting01/01/20210009/21-----
S.I. 2016 No. 1101EN 61242:1997,
EN 61242:1997/A1:2008,
EN 61242:1997/A2:2016,
EN 61242:1997/A1:2008/AC:2010
Electrical accessories - Cable reels for household and similar purposes01/01/20210009/21-----
S.I. 2016 No. 1101EN 61243-3:2014,
EN 61243-3:2014/AC:2015,
EN 61243-3:2014/AC:2015
Live working - Voltage detectors - Part 3: Two-pole low-voltage type01/01/20210009/21-----
S.I. 2016 No. 1101EN 61270-1:1996Capacitors for microwave ovens - Part 1: General01/01/20210009/21-----
S.I. 2016 No. 1101EN 61293:1994Marking of electrical equipment with ratings related to electrical supply - Safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61310-1:2008Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals01/01/20210009/21-----
S.I. 2016 No. 1101EN 61310-2:2008Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking01/01/20210009/21-----
S.I. 2016 No. 1101EN 61310-3:2008Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators01/01/20210009/21-----
S.I. 2016 No. 1101EN 61316:1999Industrial cable reels01/01/20210009/21-----
S.I. 2016 No. 1101EN 61347-1:2015Lamp controlgear - Part 1: General and safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61347-2-2:2012Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps01/01/20210009/21-----
S.I. 2016 No. 1101EN 61347-2-3:2011,
EN 61347-2-3:2011/AC:2011
Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps01/01/20210009/21-----
S.I. 2016 No. 1101EN 61347-2-7:2012Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 61347-2-7:2012,
EN 61347-2-7:2012/A1:2019
Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)01/01/20210009/21-----
S.I. 2016 No. 1101EN 61347-2-8:2001,
EN 61347-2-8:2001/A1:2006,
EN 61347-2-8:2001/AC:2003,
EN 61347-2-8:2001/AC:2010
Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps01/01/20210009/21-----
S.I. 2016 No. 1101EN 61347-2-9:2013Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)01/01/20210009/21-----
S.I. 2016 No. 1101EN 61347-2-10:2001,
EN 61347-2-10:2001/A1:2009,
EN 61347-2-10:2001/AC:2010
Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)01/01/20210009/21-----
S.I. 2016 No. 1101EN 61347-2-11:2001,
EN 61347-2-11:2001/AC:2002,
EN 61347-2-11:2001/AC:2010
Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 61347-2-11:2001,
EN 61347-2-11:2001/AC:2002,
EN 61347-2-11:2001/AC:2010,
EN 61347-2-11:2001/A1:2019
Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires01/01/20210009/21-----
S.I. 2016 No. 1101EN 61347-2-12:2005,
EN 61347-2-12:2005/A1:2010,
EN 61347-2-12:2005/AC:2010
Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)01/01/20210009/21-----
S.I. 2016 No. 1101EN 61347-2-13:2014Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules01/01/20210009/21-----
S.I. 2016 No. 1101EN 61386-1:2008Conduit systems for cable management - Part 1: General requirements01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 61386-1:2008,
EN 61386-1:2008/A1:2019
Conduit systems for cable management - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61386-21:2004,
EN 61386-21:2004/A11:2010,
EN 61386-21:2004/AC:2004
Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 61386-22:2004,
EN 61386-22:2004/A11:2010,
EN 61386-22:2004/AC:2004
Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 61386-23:2004,
EN 61386-23:2004/A11:2010,
EN 61386-23:2004/AC:2004
Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 61386-24:2010Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground01/01/20210009/21-----
S.I. 2016 No. 1101EN 61386-25:2011Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices01/01/20210009/21-----
S.I. 2016 No. 1101EN 61439-1:2011Low-voltage switchgear and controlgear assemblies - Part 1: General rules01/01/20210009/21-----
S.I. 2016 No. 1101EN 61439-2:2011Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies01/01/20210009/21-----
S.I. 2016 No. 1101EN 61439-3:2012Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)01/01/20210009/21---03/02/20210009/21
S.I. 2016 No. 1101EN 61439-3:2012,
EN 61439-3:2012/AC:2019-04
Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)01/01/20210009/21-----
S.I. 2016 No. 1101EN 61439-4:2013Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)01/01/20210009/21-----
S.I. 2016 No. 1101EN 61439-5:2015,
EN 61439-5:2015/AC:2015
Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks01/01/20210009/21-----
S.I. 2016 No. 1101EN 61439-6:2012Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)01/01/20210009/21-----
S.I. 2016 No. 1101EN 61534-1:2011,
EN 61534-1:2011/A1:2014
Powertrack systems - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61534-21:2014Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting01/01/20210009/21-----
S.I. 2016 No. 1101EN 61534-22:2014Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation01/01/20210009/21-----
S.I. 2016 No. 1101EN 61535:2009,
EN 61535:2009/A1:2013
Installation couplers intended for permanent connection in fixed installations01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN IEC 61535:2019Installation couplers intended for permanent connection in fixed installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 61537:2007Cable management - Cable tray systems and cable ladder systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 61549:2003,
EN 61549:2003/A3:2012,
EN 61549:2003/A1:2005,
EN 61549:2003/A2:2010
Miscellaneous lamps01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-1:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-2:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-3:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-4:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-5:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-6:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-7:2007Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-8:2015Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-9:2015Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems01/01/20210009/21---03/02/20210009/21
S.I. 2016 No. 1101EN 61557-9:2015,
EN 61557-9:2015/AC:2017-02
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-10:2013Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-11:2009Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-12:2008Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-13:2011Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-14:2013Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-15:2014Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 61557-16:2015Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-1:2005,
EN 61558-1:2005/A1:2009,
EN 61558-1:2005/AC:2006
Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN IEC 61558-1:2019Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-1:2007Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-2:2007Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-3:2010Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-4:2009Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-5:2010Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-6:2009Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-7:2007Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-8:2010Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-9:2011Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-12:2011Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-13:2009Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-14:2013Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-15:2012Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-16:2009,
EN 61558-2-16:2009/A1:2013
Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-20:2011Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-23:2010Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites01/01/20210009/21-----
S.I. 2016 No. 1101EN 61558-2-26:2013Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes01/01/20210009/21-----
S.I. 2016 No. 1101EN 61643-11:2012Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 61643-11:2012,
EN 61643-11:2012/A11:2018
Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods01/01/20210009/21-----
S.I. 2016 No. 1101EN 61643-21:2001,
EN 61643-21:2001/A1:2009,
EN 61643-21:2001/A2:2013
Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods01/01/20210009/21-----
S.I. 2016 No. 1101EN 61643-31:2019Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for photovoltaic installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 61730-1:2007,
EN 61730-1:2007/A1:2012,
EN 61730-1:2007/A11:2014,
EN 61730-1:2007/A2:2013
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction01/01/20210009/21---27/04/20210009/21
S.I. 2016 No. 1101EN IEC 61730-1:2018,
EN IEC 61730-1:2018/AC:2018-06
Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction01/01/20210009/21-----
S.I. 2016 No. 1101EN 61730-2:2007,
EN 61730-2:2007/A1:2012
Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing01/01/20210009/21---27/04/20210009/21
S.I. 2016 No. 1101EN IEC 61730-2:2018,
EN IEC 61730-2:2018/AC:2018-06
Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing01/01/20210009/21-----
S.I. 2016 No. 1101EN 61770:2009,
EN 61770:2009/AC:2011
Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets01/01/20210009/21-----
S.I. 2016 No. 1101EN 61800-5-1:2007Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy01/01/20210009/21-----
S.I. 2016 No. 1101EN 61812-1:2011Time relays for industrial and residential use - Part 1: Requirements and tests01/01/20210009/21-----
S.I. 2016 No. 1101EN 61851-1:2011Electric vehicle conductive charging system - Part 1: General requirements01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN IEC 61851-1:2019Electric vehicle conductive charging system - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61851-21:2002Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply01/01/20210009/21-----
S.I. 2016 No. 1101EN 61851-22:2002Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station01/01/20210009/21-----
S.I. 2016 No. 1101EN 61851-23:2014,
EN 61851-23:2014/AC:2016-06
Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station01/01/20210009/21-----
S.I. 2016 No. 1101EN 61851-24:2014,
EN 61851-24:2014/AC:2015
Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging01/01/20210009/21-----
S.I. 2016 No. 1101EN 61869-1:2009Instrument transformers - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61869-2:2012Instrument transformers - Part 2: Additional requirements for current transformers01/01/20210009/21-----
S.I. 2016 No. 1101EN 61869-3:2011Instrument transformers - Part 3: Additional requirements for inductive voltage transformers01/01/20210009/21-----
S.I. 2016 No. 1101EN 61869-4:2014,
EN 61869-4:2014/AC:2014
Instrument transformers - Part 4: Additional requirements for combined transformers01/01/20210009/21-----
S.I. 2016 No. 1101EN 61869-5:2011,
EN 61869-5:2011/AC:2015
Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers01/01/20210009/21-----
S.I. 2016 No. 1101EN 61914:2016Cable cleats for electrical installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 61921:2003Power capacitors - Low-voltage power factor correction banks01/01/20210009/21-----
S.I. 2016 No. 1101EN 61995-1:2008Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 61995-2:2009Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL01/01/20210009/21-----
S.I. 2016 No. 1101EN 62020:1998,
EN 62020:1998/A1:2005
Electrical accessories - Residual current monitors for household and similar uses (RCMs)01/01/20210009/21-----
S.I. 2016 No. 1101EN 62026-1:2007Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules01/01/20210009/21-----
S.I. 2016 No. 1101EN 62026-2:2013Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)01/01/20210009/21-----
S.I. 2016 No. 1101EN 62026-3:2015Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet01/01/20210009/21---03/02/20210009/21
S.I. 2016 No. 1101EN 62026-3:2015,
EN 62026-3:2015/AC:2019-12
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet01/01/20210009/21-----
S.I. 2016 No. 1101EN 62026-7:2013Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet01/01/20210009/21-----
S.I. 2016 No. 1101EN 62031:2008,
EN 62031:2008/A1:2013,
EN 62031:2008/A2:2015
LED modules for general lighting - Safety specifications01/01/20210009/21-----
S.I. 2016 No. 1101EN 62035:2014Discharge lamps (excluding fluorescent lamps) - Safety specifications01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN 62035:2014,
EN 62035:2014/A1:2019
Discharge lamps (excluding fluorescent lamps) - Safety specifications01/01/20210009/21-----
S.I. 2016 No. 1101EN 62040-1:2008,
EN 62040-1:2008/A1:2013,
EN 62040-1:2008/AC:2009
Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS01/01/20210009/21-----
S.I. 2016 No. 1101EN 62080:2009Sound signalling devices for household and similar purposes01/01/20210009/21-----
S.I. 2016 No. 1101EN 62094-1:2003,
EN 62094-1:2003/A11:2003
Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 62109-1:2010Safety of power converters for use in photovoltaic power systems - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 62109-2:2011Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters01/01/20210009/21-----
S.I. 2016 No. 1101EN 62135-1:2015Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation01/01/20210009/21-----
S.I. 2016 No. 1101EN 62196-1:2014Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 62196-3:2014Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers01/01/20210009/21-----
S.I. 2016 No. 1101EN 62208:2011Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 62233:2008,
EN 62233:2008/AC:2008
Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure01/01/20210009/21-----
S.I. 2016 No. 1101EN 62253:2011Photovoltaic pumping systems - Design qualification and performance measurements01/01/20210009/21-----
S.I. 2016 No. 1101EN 62275:2015Cable management systems - Cable ties for electrical installations01/01/20210009/21---03/02/20220009/21
S.I. 2016 No. 1101EN IEC 62275:2019Cable management systems - Cable ties for electrical installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 62282-3-100:2012Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety01/01/20210009/21-----
S.I. 2016 No. 1101EN 62282-3-300:2012Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation01/01/20210009/21-----
S.I. 2016 No. 1101EN 62282-5-1:2012Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety01/01/20210009/21-----
S.I. 2016 No. 1101EN 62310-1:2005Static transfer systems (STS) - Part 1: General and safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 62311:2008Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)01/01/20210009/21-----
S.I. 2016 No. 1101EN 62368-1:2014,
EN 62368-1:2014/AC:2015,
EN 62368-1:2014/AC:2015,
EN 62368-1:2014/AC:2015
Audio/video, information and communication technology equipment - Part 1: Safety requirements (IEC 62368-1:2014, modified)01/01/20210009/21-----
S.I. 2016 No. 1101EN 62395-1:2013Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 62423:2012Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses01/01/20210009/21-----
S.I. 2016 No. 1101EN 62444:2013Cable glands for electrical installations01/01/20210009/21-----
S.I. 2016 No. 1101EN 62471:2008Photobiological safety of lamps and lamp systems01/01/20210009/21-----
S.I. 2016 No. 1101EN 62477-1:2012,
EN 62477-1:2012/A11:2014
Safety requirements for power electronic converter systems and equipment - Part 1: General01/01/20210009/21-----
S.I. 2016 No. 1101EN 62479:2010Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)01/01/20210009/21-----
S.I. 2016 No. 1101EN 62493:2010Assessment of lighting equipment related to human exposure to electromagnetic fields01/01/20210009/21-----
S.I. 2016 No. 1101EN 62532:2011Fluorescent induction lamps - Safety specifications01/01/20210009/21-----
S.I. 2016 No. 1101EN 62549:2011Articulated systems and flexible systems for cable guiding01/01/20210009/21-----
S.I. 2016 No. 1101EN 62560:2012,
EN 62560:2012/A1:2015,
EN 62560:2012/A1:2015/AC:2015,
EN 62560:2012/AC:2015
Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 62560:2012,
EN 62560:2012/A1:2015,
EN 62560:2012/A1:2015/AC:2015,
EN 62560:2012/AC:2015,
EN 62560:2012/A11:2019
Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications01/01/20210009/21-----
S.I. 2016 No. 1101EN 62606:2013General requirements for arc fault detection devices01/01/20210009/21---27/05/20210009/21
S.I. 2016 No. 1101EN 62606:2013,
EN 62606:2013/A1:2017
General requirements for arc fault detection devices01/01/20210009/21-----
S.I. 2016 No. 1101EN 62626-1:2014Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work01/01/20210009/21-----
S.I. 2016 No. 1101HD 62640:2015Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses01/01/20210009/21-----
S.I. 2016 No. 1101EN 62776:2015Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications01/01/20210009/21-----
S.I. 2016 No. 1101EN 62868:2015Organic light emitting diode (OLED) panels for general lighting - Safety requirements01/01/20210009/21-----
S.I. 2016 No. 1101EN 62949:2017Particular safety requirements for equipment to be connected to information and communication networks01/01/20210009/21-----
S.I. 2016 No. 1101EN 63024:2018Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses01/01/20210009/21-----
S.I. 2016 No. 1101EN IEC 63044-3:2018Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements01/01/20210009/21-----

Radio Equipment

Legislation reference (A)Reference number of the designated standard (B)Title of the designated standard (C)Date of start of presumption of conformity (1)Notice of Publication reference (2)Restriction (3)Date of start of presumption of conformity with restriction (4)Notice of Publication reference of a restriction (5)Date of removal from publication (end of presumption of conformity) (6)Notice of Publication reference for withdrawal (7)
S.I. 2017 No. 1206EN 50360:2017Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 300 MHz to 6 GHz: devices used next to the ear01/01/20210010/21-----
S.I. 2017 No. 1206EN 50385:2017Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when placed on the market01/01/20210010/21-----
S.I. 2017 No. 1206EN 50401:2017Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service01/01/20210010/21-----
S.I. 2017 No. 1206EN 50566:2017Product standard to demonstrate the compliance of wireless communication devices with the basic restrictions and exposure limit values related to human exposure to electromagnetic fields in the frequency range from 30 MHz to 6 GHz: hand-held and body mounted devices in close proximity to the human body01/01/20210010/21-----
S.I. 2017 No. 1206EN 55035:2017Electromagnetic compatibility of multimedia equipment - Immunity requirements01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 065 V2.1.2Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 224 V2.1.1Land Mobile Service; Radio Equipment for use in a Paging Service operating within the frequency range 25 MHz - 470 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 065-2 V2.1.1Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Requirements for UWB location tracking01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 065-3 V2.1.1Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: Require- ments for UWB devices for ground based vehicular applications01/01/20210010/21This standard does not set out technical specifications for ‘trigger-before-transmit techniques’. Implementing Decision (EU) 2019/785, however, imposes, as of 16 November 2019, technical requirements to be used within the bands 3,8-4,2 GHz and 6-8,5 GHz for vehicular access systems using trigger-before-transmit. Therefore compliance with this standard does not ensure compliance with Implementing Decision (EU) 2019/785 and accordingly does not confer a presumption of conformity with those essential requirements set out in regulation 6(2) of S.I. 2017/1206 which relate to ‘trigger- before-transmit techniques’.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 217-2 V3.2.2Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard for access to radio spectrum
Notice: Compliance with this standard does not confer a presumption of conformity with the essential requirement set out in regulation 6(2) of S.I. 2017/1206 if note 2 of clause 4.3.2 of this standard is applied;
01/01/20210010/21Compliance with this standard does not confer a presumption of conformity with the essential requirement set out in regulation 6(2) of S.I. 2017/1206 if note 2 of clause 4.3.2 of this standard is applied;
As regards the radio equipment covered by either clause H.3.4, I.3.4 or J.3.4 of this standard, compliance with this standard does not confer a presumption of conformity with the essential requirement set out in regulation 6(2) of S.I. 2017/1206 in case that the appropriate test methods are not carried out in order to demonstrate compliance, respectively, with either clause H.3.4, I.3.4 or J.3.4 of this standard.
01/01/20210010/21--
S.I. 2017 No. 1206EN 302 065-4 V1.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall- Probing Radar applications (GPR/WPR) imaging systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 066-2 V1.2.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Terrestrial - Digital Audio Broadcasting (T-DAB) service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 077-2 V1.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 186 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite mobile Aircraft Earth Stations (AESs) operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 194-2 V1.1.2Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on inland waterways; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.----
S.I. 2017 No. 1206EN 302 195 V2.1.1Short Range Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and accessories (ULP-AMI-P) operating in the frequency range 9 kHz to 315 kHz Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 208 V3.1.1Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W and in the band 915 MHz to 921 MHz with power levels up to 4 W; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 217-2 V3.1.1Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21---27/04/20220010/21
S.I. 2017 No. 1206EN 302 245-2 V1.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Digital Radio Mondiale (DRM) broadcasting service Part 2: Harmonized EN under article 3.2 of the R&TTE Directive01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 248 V2.1.1Navigation radar for use on non-SOLAS vessels; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 264-2 V1.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short Range Radar equipment operating in the 77 GHz to 81 GHz band; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 288-2 V1.6.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Short range radar equipment operating in the 24 GHz range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 296-2 V1.2.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the digital television broadcast service, Terrestrial (DVB-T); Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 296 V2.1.1Land Mobile Service; Radio equipment using integral antennas intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 326-2 V1.2.2Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 340 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 11/12/14 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 372 V2.1.1Short Range Devices (SRD); Tank Level Probing Radar (TLPR) equipment operating in the frequency ranges 4,5 GHz to 7 GHz, 8,5 GHz to 10,6 GHz, 24,05 GHz to 27 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 448 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for tracking Earth Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 454 V2.2.1Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz frequency range; Harmonised Standard for access to radio spectrum01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 480 V2.1.2Mobile Communication On Board Aircraft (MCOBA) systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 502 V2.1.1Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 510-2 V1.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the frequency range 30 MHz to 37,5 MHz for Ultra Low Power Active Medical Membrane Implants and Accessories; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 300 328 V2.1.1Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21---06/08/20210010/21
S.I. 2017 No. 1206EN 300 328 V2.2.2Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; Harmonised Standard for access to radio spectrum01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 536-2 V1.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 537 V2.1.1Ultra Low Power Medical Data Service (MEDS) Systems operating in the frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 561 V2.1.1Land Mobile Service; Radio equipment using constant or non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 567 V1.2.1Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 571 V2.1.1Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 MHz to 5 925 MHz frequency band; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 574-1 V2.1.2Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Complementary Ground Component (CGC) for wideband systems01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 213-6-1 V3.1.1Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standard for access to radio spectrum for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW01/01/20210010/21 As regards clause 4.2.1.5 of this standard, compliance of this standard does not confer a presumption of conformity with the essential requirement set out in regulation 6(2) of S.I. 2017/1206 to equipment not combining a “WR112/R84 taper section and a WR90/R100 Waveguide” as in note 1 of Section 1 of this standard. The waveguide is requested to have a continuously unobstructed transmission path (unperturbed/pure) and a minimum length of 20 times the waveguide cut-off wavelength in that operational mode.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 574-2 V2.1.2Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: User Equipment (UE) for wideband systems01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 574-3 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: User Equipment (UE) for narrowband systems01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 608 V1.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment for Eurobalise railway systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 609 V2.1.1Short Range Devices (SRD); Radio equipment for Euroloop railway systems; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 330 V2.1.1Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 617 V2.3.1Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical mobile service using amplitude modulation; Harmonised Standard for access to radio spectrum01/01/20210010/21----
S.I. 2017 No. 1206EN 303 364-3 V1.1.1Primary Surveillance Radar (PSR); Harmonised Standard for access to radio spectrum; Part 3: Air Traffic Control (ATC) PSR sensors operating in the frequency band 8 500 MHz to 10 000 MHz (X band)01/01/2021As regards clause 4.2.1.4 of this standard, compliance with this standard does not confer a presumption of conformity with the essential requirement set out in regulation 6(2) of S.I. 2017/1206 to equipment not combining a “WR112/R84 taper section and a WR90/R100 Waveguide” as in note 1 of Section 1 of this standard. The waveguide is requested to have a continuously unobstructed transmission path (unperturbed/pure) and a minimum length of 20 times the waveguide cut-off wavelength in that operational mode01/01/20210010/21--
S.I. 2017 No. 1206EN 303 213-5-1 V1.1.1Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 5: Harmonised Standard for access to radio spectrum for Multilateration (MLAT) equipment; Sub-part 1: Receivers and Interrogators01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 686 V1.1.1Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 63 GHz to 64 GHz frequency band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaThis standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 729 V2.1.1Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 098 V2.2.1Maritime low power personal locating devices employing AIS; Harmonised Standard for access to radio spectrum01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 752 V1.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Active radar target enhancers; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/2106/02/20210010/21
S.I. 2017 No. 1206EN 303 345-2 V1.1.1Broadcast Sound Receivers; Part 2: AM broadcast sound service; Harmonised Standard for access to radio spectrum01/01/20210010/21Compliance with this standard does not confer a presumption of conformity with the essential requirement set out in regulation 6(2) of S.I. 2017/1206 as regards the receiver unwanted emissions in the spurious domain.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 858-2 V1.3.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Automotive radar equipment operating in the 24,05 GHz up to 24,25 GHz or 24,50 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 303 345-5 V1.1.1Broadcast Sound Receivers; Part 5: DRM broadcast sound service; Harmonised Standard for access to radio spectrum01/01/20210010/21Compliance with this standard does not confer a presumption of conformity with the essential requirement set out in regulation 6(2) of S.I. 2017/1206 as regards the receiver unwanted emissions in the spurious domain.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 885 V2.2.3Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands with integrated handheld class H DSC; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 341 V2.1.1Land Mobile Service; Radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 961 V2.1.2Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and rescue purposes only; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 977 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for Vehicle-Mounted Earth Stations (VMES) operating in the 14/12 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 039 V2.1.2Land Mobile Service; Multichannel transmitter specification for the PMR Service; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 084 V2.1.1Ground Based Augmentation System (GBAS) VHF ground-air Data Broadcast (VDB); Technical characteristics and methods of measurement for ground-based equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 098 V2.1.1Maritime low power personal locating devices employing AIS; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21---06/02/20210010/21
S.I. 2017 No. 1206EN 303 132 V1.1.1Maritime low power VHF personal locating beacons employing Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 135 V2.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Coastal Surveillance, Vessel Traffic Services and Harbour Radars (CS/VTS/HR); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 203 V2.1.1Short Range Devices (SRD); Medical Body Area Network Systems (MBANSs) operating in the 2 483,5 MHz to 2 500 MHz range; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 204 V2.1.2Network Based Short Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876 MHz frequency range with power levels ranging up to 500 mW; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 213-6-1 V2.1.1Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU for deployed surface movement radar sensors; Sub-part 1: X-band sensors using pulsed signals and transmitting power up to 100 kW01/01/20210010/21---27/10/20210010/21
S.I. 2017 No. 1206EN 300 390 V2.1.1Land Mobile Service; Radio equipment intended for the transmission of data (and speech) and using an integral antenna; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 276 V1.1.1Maritime Broadband Radiolink operating within the bands 5 852 MHz to 5 872 MHz and/or 5 880 MHz to 5 900 MHz for ships and off-shore installations engaged in coordinated activities; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 520 V1.2.1Short Range Devices (SRD); Ultra Low Power (ULP) wireless medical capsule endoscopy devices operating in the band 430 MHz to 440 MHz; Harmonised Standard for access to radio spectrum01/01/20210010/21Compliance with this standard does not confer a presumption of conformity with the essential requirement set out in regulation 6(2) of S.I. 2017/1206 if any of the following are applied: — with respect to clause B.1 of Annex B: ‘The manufacturer and test laboratory may agree on alternative suitable implementation of human torso simulator, which shall be then fully described in the test report’; — with respect to clause C.1 of Annex C: ‘Alternatively, the manufacturer and test laboratory may agree to use a Semi-Anechoic Room, the setup of which shall be then fully described in the test report’.
Notice: The temperature referred to in clause B.2 of Annex B shall reflect the intended use.
01/01/20210010/21--
S.I. 2017 No. 1206EN 303 339 V1.1.1Broadband Direct Air-to-Ground Communications; Equipment operating in the 1 900 MHz to 1 920 MHz and 5 855 MHz to 5 875 MHz frequency bands; Fixed pattern antennas; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21---27/04/20210010/21
S.I. 2017 No. 1206EN 303 340 V1.1.2Digital Terrestrial TV Broadcast Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 354 V1.1.1Amplifiers and active antennas for TV broadcast reception in domestic premises; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 372-1 V1.1.1Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Outdoor unit receiving in the 10,7 GHz to 12,75 GHz frequency band01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 372-2 V1.1.1Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 2: Indoor unit01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 402 V2.1.2Maritime mobile transmitters and receivers for use in the MF and HF bands; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 406 V1.1.1Short Range Devices (SRD); Social Alarms Equipment operating in the frequency range 25 MHz to 1 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 422-1 V2.1.2Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Class A Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 413 V1.1.1Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the 1 164 MHz to 1 300 MHz and 1 559 MHz to 1 610 MHz frequency bands; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 520 V1.1.1Short Range Devices (SRD); Ultra Low Power (ULP) wireless medical capsule endoscopy devices operating in the band 430 MHz to 440 MHz; Harmonised Standard for access to radio spectrum01/01/20210010/21---06/08/20210010/21
S.I. 2017 No. 1206EN 303 609 V12.5.1Global System for Mobile communications (GSM); GSM Repeaters; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 978 V2.1.2Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 303 979 V2.1.2Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobile Platforms (ESOMP) transmitting towards satellites in non-geostationary orbit, operating in the 27,5 GHz to 29,1 GHz and 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 305 550-2 V1.2.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 40 GHz to 246 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 300 422-2 V2.1.1Wireless Microphones; Audio PMSE up to 3 GHz; Part 2: Class B Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 422-3 V2.1.1Wireless Microphones; Audio PMSE up to 3 GHz; Part 3: Class C Receivers; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 086 V2.1.2Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 422-4 V2.1.1Wireless Microphones; Audio PMSE up to 3 GHz; Part 4: Assistive Listening Devices including personal sound amplifiers and inductive systems up to 3 GHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 433 V2.1.1Citizens' Band (CB) radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 440 V2.1.1Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21This standard does not address, for receiver categories 2 and 3 as defined in Table 5, the requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 300 454-2 V1.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 300 487 V2.1.2Satellite Earth Stations and Systems (SES); Harmonised Standard for Receive-Only Mobile Earth Stations (ROMES) providing data communications operating in the 1,5 GHz frequency band; Radio Frequency (RF) specifications covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 674-2-2 V2.2.1Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHz to 5 815 MHz frequency band; Part 2: Harmonised Standard for access to radio spectrum; Sub-part 2: On-Board Units (OBU)01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 113 V2.2.1Land Mobile Service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 674-2-2 V2.1.1Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5 795 MHz to 5 815 MHz frequency band; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Sub-part 2: On-Board Units (OBU)01/01/20210010/21---06/08/20210010/21
S.I. 2017 No. 1206EN 300 676-2 V2.1.1Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 698 V2.2.1Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU01/01/20210010/21---06/08/20210010/21
S.I. 2017 No. 1206EN 300 698 V2.3.1Radio telephone transmitters and receivers for the maritime mobile service operating in the VHF bands used on inland waterways; Harmonised Standard for access to radio spectrum and for features for emergency services01/01/20210010/21 Compliance with this standard does not confer a presumption of conformity to the essential requirement set out in regulation 6(2) of 2017/1206 if, in clause 8.2.3 of this standard, the sentence ‘With the output power switch set at maximum, the carrier power shall be within ±1,5 dB of the rated output power under normal test conditions’ is applied.01/01/20210010/21--
S.I. 2017 No. 1206EN 300 718-2 V1.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 300 718-2 V2.1.1Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised Standard for features for emergency services01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 720 V2.1.1Ultra-High Frequency (UHF) on-board vessels communications systems and equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 025 V2.2.1VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Harmonised Standard covering the essential requirements of articles 3.2 and 3.3(g) of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 219 V2.1.1Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 091-2 V1.3.2Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 301 166 V2.1.1Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrow band channels and having an antenna connector; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 178 V2.2.2Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 357 V2.1.1Cordless audio devices in the range 25 MHz to 2 000 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 360 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 27,5 GHz to 29,5 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 406 V2.2.2Digital Enhanced Cordless Telecommunications (DECT); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 426 V2.1.2Satellite Earth Stations and Systems (SES); Harmonised Standard for Low data rate Land Mobile satellite Earth Stations (LMES) and Maritime Mobile satellite Earth Stations (MMES) not intended for distress and safety communications operating in the 1,5 GHz/1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 220-2 V3.1.1Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU for non specific radio equipment01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 427 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for low data rate Mobile satellite Earth Stations (MES) except aeronautical mobile satellite earth stations, operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 428 V2.1.2Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 430 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite News Gathering Transportable Earth Stations (SNG TES) operating in the 11 GHz to 12 GHz/13 GHz to 14 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 441 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1,6 GHz/2,4 GHz frequency band under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 442 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for NGSO Mobile Earth Stations (MES) including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands under the Mobile Satellite Service (MSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 443 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 444 V2.1.2Satellite Earth Stations and Systems (SES); Harmonised Standard for Land Mobile Earth Stations (LMES) providing voice and/or data communications, operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 447 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Stations on board Vessels (ESVs) operating in the 4/6 GHz frequency bands allocated to the Fixed Satellite Service (FSS) covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 459 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit, operating in the 29,5 GHz to 30,0 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 473 V2.1.2Satellite Earth Stations and Systems (SES); Harmonised Standard for Aircraft Earth Stations (AES) providing Aeronautical Mobile Satellite Service (AMSS)/Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/Mobile Satellite Service (MSS), operating in the frequency band below 3 GHz covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 502 V12.5.2Global System for Mobile communications (GSM); Base Station (BS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-1 V13.1.1IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 1: Introduction and common requirements01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 511 V12.5.1Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 559 V2.1.1Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) and associated Peripherals (LP-AMI-P) operating in the frequency range 2 483,5 MHz to 2 500 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 598 V1.1.1White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive01/01/20210010/21This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 301 908-2 V13.1.1IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-3 V13.1.1IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 681 V2.1.2Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) of Geostationary mobile satellite systems, including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) under the Mobile Satellite Service (MSS), operating in the 1,5 GHz and 1,6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 220-3-1 V2.1.1Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Low duty cycle high reliability equipment, social alarms equipment operating on designated frequencies (869,200 MHz to 869,250 MHz)01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 721 V2.1.1Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using Low Earth Orbiting (LEO) satellites operating below 1 GHz frequency band covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 783 V2.1.1Commercially available amateur radio equipment; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 839 V2.1.1Ultra Low Power Active Medical Implants (ULP-AMI) and associated Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 841-3 V2.1.1VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measurement for ground-based equipment; Part 3: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 842-5 V2.1.1VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 5: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-13 V13.1.1IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)01/01/20210010/21This standard does not contain antenna performance parameters and compliance with this standard does not confer a presumption of conformity with the essential requirement set out in regulation 6(2) of S.I. 2017/1206 as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 301 908-14 V13.1.1IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 893 V2.1.15 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-1 V11.1.1IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Introduction and common requirements01/01/20210010/21---22/10/20210010/21
S.I. 2017 No. 1206EN 301 908-18 V13.1.1IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-2 V11.1.2IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)01/01/20210010/21---27/10/20210010/21
S.I. 2017 No. 1206EN 301 908-3 V11.1.3IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)01/01/20210010/21---22/10/20210010/21
S.I. 2017 No. 1206EN 300 220-3-2 V1.1.1Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-2: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Wireless alarms operating in designated LDC/HR frequency bands 868,60 MHz to 868,70 MHz, 869,25 MHz to 869,40 MHz, 869,65 MHz to 869,70 MHz01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-10 V4.2.2Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 10: Harmonised Standard for IMT-2000, FDMA/TDMA (DECT) covering the essential requirements of article 3.2 of the Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-11 V11.1.2IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 11: CDMA Direct Spread (UTRA FDD) Repeaters01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-12 V7.1.1IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 12: CDMA Multi-Carrier (cdma2000) Repeaters01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-13 V11.1.2IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)01/01/20210010/21---27/10/20210010/21
S.I. 2017 No. 1206EN 301 908-14 V11.1.2IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)01/01/20210010/21---21/10/20210010/21
S.I. 2017 No. 1206EN 301 908-15 V11.1.2IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 15: Evolved Universal Terrestrial Radio Access (E-UTRA FDD) Repeaters01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-18 V11.1.2IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)01/01/20210010/21---21/10/20210010/21
S.I. 2017 No. 1206EN 301 908-19 V6.3.1IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 19: OFDMA TDD WMAN (Mobile WiMAXTM) TDD User Equipment (UE)01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-20 V6.3.1IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 20: OFDMA TDD WMAN (Mobile WiMAXTM) TDD Base Stations (BS)01/01/20210010/21-----
S.I. 2017 No. 1206EN 300 220-4 V1.1.1Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-21 V6.1.1IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 21: OFDMA TDD WMAN (Mobile WiMAXTM) FDD User Equipment (UE)01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 908-22 V6.1.1IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 22: OFDMA TDD WMAN (Mobile WiMAXTM) FDD Base Stations (BS)01/01/20210010/21-----
S.I. 2017 No. 1206EN 301 929 V2.1.1VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 017 V2.1.1Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 018 V2.1.1Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 054 V2.2.1Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Harmonised Standard for access to radio spectrum01/01/20210010/21-----
S.I. 2017 No. 1206EN 302 064-2 V1.1.1Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive01/01/20210010/21Notice: This standard does not address requirements relating to receiver performance parameters and does not confer a presumption of conformity as regards those parameters.01/01/20210010/21--
S.I. 2017 No. 1206EN 302 065-1 V2.1.1Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 1: Requirements for Generic UWB applications01/01/20210010/21-----

Answering Some UKCA Questions

What’s this new UKCA Mark?

The UKCA (UK Conformity Assessed) mark is the new UK product marking that will be required for products being placed on the UK market (England, Scotland, Wales). This new mark will cover most products that were previously covered by the EU’s CE mark.

Now we’re out of the EU, the CE mark will no longer be recognised to indicate compliance in the UK, and conversely, the UKCA mark will not be recognised in the EU to infer the same. This means that any products sold into the EU from the UK will still require the CE mark to be applied.
The Northern Ireland Protocol means that the rules covering CE marking will still apply.

What does the new mark show?

By affixing the UKCA mark to a product and placing it on the UK market, the manufacturer of that product is stating that the product meets the UK Regulations as defined in the relevant Statutory Instruments.

When will the new mark be required on products?

The UKCA mark came into force on the 1st January 2021, which marked the end of the transition period. To allow manufacturers to catch up though, the CE mark will continue to be accepted until the 1st January 2022.

Can CASS Industries perform the required testing to UKCA Specifications?

Yes. There is little change in the actual testing, and all the standards are the same as before. We at CASS Industries are able to test to both UKCA & CE marking systems, and are able to offer advice & support to customers requiring either, or both technical documentation files as required.

Can I still Self-Certify Compliance?

Yes. The principle of self-certification & 3rd party assessment remains unchanged at this time.

Placing Products on the British Market

The UKCA mark can be used to demonstrate conformity with UK regulations for products placed on the market after the 1st January 2021. As mentioned above, the CE mark can continue to be used until the 31st December 2021.
If the all the following conditions apply, then the UKCA mark must be used immediately from the 1st January 2021:

  • The product is covered by legislation which requires the UKCA mark
  • The product requires mandatory 3rd party assessment
  • The 3rd party assessment has been carried out by an EU Notified Body located in the UK & the files have not been transferred to an EU27 Notified Body
  • The product is intended for sale on the GB market.

This does not apply to existing stock, if that stock was fully manufactured & ready for market before the 1st January 2021. In these cases, the goods can still be sold in Britain with CE marking even if covered by a Declaration of Conformity issued by a UK Body.

  • From the 1st January 2022, all products to be available on the British market must be UKCA marked unless special arrangements are in place.
  • CE Marking for Medical Devices will still be recognised in Britain until 30 June 2023 assuming that British & EU rules maintain synergy.
  • Any product that is currently CE marked on the basis of an EU Notified Body assessment are required from the 1st January 2022 to be assessed by a UK Approved Body before they can be placed on the British market.
  • For businesses based in Northern Ireland, products which qualify can be placed on the British market with an EU CE marking after the 31st December 2021.

I want to place a product on the EU market. What assessment is required?

  • For goods using self-certification, no further action is required.
  • For goods having 3rd party assessment by an EU27 notified body, no further action is required.
  • For goods that have a 3rd party assessment made by an EU Notified Body located in the UK, the files will need to have been passed on to an EU27 Notified Body before 1st January 2021, or a new assessment needs to be completed by an EU27 Notified Body.

I want to place a product on the Northern Ireland market. What assessment is required?

  • Any new & existing goods that are CE marked can be placed on the market with no changes at all.
  • The UKCA mark is not recognised in Northern Ireland.
  • Any goods that require a 3rd party assessment can be placed on the Northern Ireland market using either an EU27 Notified Body and affixed with the CE mark, or a UK Approved Body and affixed with both the CE & UKNI marks. Products marked with both marks cannot be sold into the EU market, as UK Approved Bodies are not recognised within the EU.
  • Any existing 3rd party assessment from an EU27 Notified Body will continue to be accepted by Northern Ireland.

UKCA Mark – Making the Transition

As we all know, the UK has left the EU. As a result of this the CE Mark will no longer be recognised as demonstrating conformity within UK legislation after the transition period has ended.

Instead, the UK has created it’s own conformity mark, the UKCA Mark:

The transition period is closer than you think! It begins on the 1st January 2021, and the UKCA mark will become mandatory on the 1st January 2022. This mark applies to any goods placed on the market in England, Scotland & Wales. Northern Ireland will retain the CE mark.

So what’s required?

The transition to the new UKCA mark is mainly a paperwork exercise. You’ll need to create a new UK Declaration of Conformity which is very similar to the CE Declaration (and these are still required to show CE mark compliance).

The Technical File you should be keeping well up to date for your product portfolio will need some additional information, with references the UK Statutory Instruments and Designated Standards. We can assist with these changes, if you require help, just let us know!

Once you’ve sorted out the technical file, the UKCA mark then needs to be applied to your products. The image files can be found in the zip files located below:

Until 1st January 2023, it can be applied as a label, and after this it must be “permanently attached”, as is currently done with the current CE Mark – normally by printing it directly onto the product labeling. The height of the mark must be at least 5mm.

As with the CE Mark, the product, or documentation where the product does not provide enough room, must have the manufacturer’s name & UK Address shown. If the manufacturer is outside the UK, this must be the importer’s Name & Address.

Still selling to the EU?

Unfortunately, you’re now classed as a “3rd Country”, and to be able to sell products into the EU, an EU Sales Office is required, assuming you don’t currently have a presence in the EU. The contact details of this office will need to be placed on the products for sale in the EU. There are various companies that offer an EU Authorised Representative Service, and these can be found through your favourite search engine.

Key Dates

1st January 2021The UKCA Mark becomes valid & can be placed on your electrical or electronic products to demonstrate conformity with UK Legislation At this point the CE mark enters the 12 month transition period, and is still valid for this time.
1st January 2022The CE mark ceases to be valid in the UK, and the UKCA mark becomes mandatory to demonstrate compliance.

The Legal Stuff

All the EU Directives relating to CE marking are already in UK law as Statutory Instruments. SI2019 No.696 (The Product Safety & Metrology etc Regulations 2019) modifies the below table of Statutory Instruments, along with many others to add the UKCA mark & alter some terminology used. As mentioned above, all compliance documentation in your technical file must refer to these SI’s instead of the EU Directives.

EU DirectiveUK Statutory InstrumentInformation
2014/30/EUSI 2016 No.1091The Electromagnetic Compatibility Regulations 2016 (EMC)
2014/53/EUSI 2017 No.1206The Radio Equipment Directive (RED)
2014/35/EUSI 2016 No.1101The Electrical Equipment (Safety) Regulations 2016 (LVD)
2011/65/EUSI 2012 No.3032The Restriction on Use of Hazardous Substances Regulations 2012 (RoHS)
2014/34/EUSI 2016 No.1107The Equipment & Protective Systems Intended For Use In Potentially Explosive Atmospheres Regulations 2016 (ATEX)
2006/42/EUSI 2008 No.1597The Supply of Machinery (Safety) Regulations 2008 (Machinery Directive)

Other changes include Notified Bodies are becoming Approved Bodies, and the EU Harmonised Standards will become Designated Standards. Unfortunately there’s no list of Desginated Standards yet available, but we’ll keep you up to date with what’s going on!

Test Equipment Upcycling – Variable Attenuator Module

A while back we found ourselves in the need of an adjustable RF attenuator capable of high-GHz operation. As luck would have it we had an old Spectrum analyser on the shelf, which we had retired quite some time ago. Here at CASS, we don’t like to see useful equipment or parts of equipment to to waste, so it’s time for some repurposing!

Spectrum analysers being quite capable test instruments, I knew that the input attenuation would be done with a standalone module that we could recover for reuse without too much trouble.

The attenuator module

Here’s the module itself, with the factory drive PCB removed from the bottom, showing the solenoids that operate the RF switches. There are test wires attached to them here to work out which solenoid switches which attenuation stage. In the case of this module, there are switches for the following:

  • Input select switch
  • AC/DC coupling
  • -5dB
  • -10dB
  • -20dB
  • -40dB

For us this means we have up to -75dB attenuation in 5dB steps, with optional switchable A-B input & either AC or DC coupling.

Drive is easy, requiring a pulse on the solenoid coil to switch over, the polarity depending on which way the switch is going.

Building a Control Board

Now we’d identified that the module was reusable, it was time to spin up a board to integrate all the features we needed:

  • Onboard battery power
  • Pushbutton operation
  • Indication of current attenuation level

The partially populated board is shown at right, with an Arduino microcontroller for main control, 18650 battery socket on the right, and control buttons in the centre. The OLED display module for showing the current attenuation level & battery voltage level is missing at the moment, but it’s clear where this goes.

As there weren’t enough GPIO pins for everything on the Arduino, a Microchip MC23017 16-Bit I/O expander, which is controlled via an I²C bus. This is convenient since I’m already using I²C for the onboard display.

Driving the Solenoids

A closer view of the board shows the trip of dual H-Bridge drivers on the board, which will soon be hidden underneath the attenuator block. These are LB1836M parts from ON Semiconductor. Each chip drives a pair of solenoids.

Power Supplies

The bottom of the board has all the power control circuitry, which are modularised for ease of production. There’s a Lithium charge & protection module for the 18650 onboard cell, along with a boost converter to give the ~9v rail required to operate the attenuator solenoids. While they would switch at 5v, the results were not reliable.

Finishing off

A bit more time later, some suitable firmware has been written for the Arduino, and the attenuator block is fitted onto the PCB. The onboard OLED nicely shows the current attenuation level, battery level & which input is selected.

Fire In The Hole!

To the right is a clip from one of our tests, where the cell was intentionally overcharged, demonstrating what can occur when no overcharge protection is included in Lithium Battery Packs.

As the cell reaches full charge, continued application of charging power causes the lithium ions in solution to plate out on the anode in elemental metallic form, rendering the cell highly reactive & unstable.

As the charge is continued, more lithium plates out, and the cell heats up. This heat, along with the reaction of the now metallic lithium with the flammable electrolyte causes further heating. At this point the delithiated cathode is also beginning to react with the electrolyte, releasing various gases. Both chemical processes are extremely exothermic, and the cell ruptures from the combination of heat damage & internal gas pressure.

As the electrode material breakdown continues, driven by thermal runaway & the continuing charge current, the cell vents the resulting breakdown products. Further heating as a result of the combination of chemical/electrochemical processes eventually reaches the autoignition point, and the cell explodes, spewing flames.

Welcome to the CASS Industries Blog!

Welcome to our new blog! We’ll be posting content here monthly, on a variety of subjects from general EMC and Electrical Safety, to electronic design tips & problem solving!
In the meantime, please see the other sections of our site for assistance with your product compliance needs.